mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-26 19:18:03 +06:00
Code Issues Packages Projects Releases Wiki Activity
cf5e9d172d
keychron_qmk_firmware/keyboards/ekow/akira
History
Ryan ace372d90d
Move matrix config to info.json, part 3 (#19991) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-03-11 00:34:34 +11:00
..
keymaps Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
akira.c
akira.h
info.json Move matrix config to info.json, part 3 (#19991) 2023-03-11 00:34:34 +11:00
readme.md
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

AKIRA

  • Keyboard Maintainer: eugenepy
  • Hardware Supported: AKIRA pcb, both Hotswap and solderable.
  • Hardware Availability: Not yet on groupbuy

Build

Make example for this keyboard (after setting up your build environment):

make ekow/akira:default

Flashing example for this keyboard:

make ekow/akira:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the Buttom on the back of the PCB, the board will enter the dfu-mode, no extra pads need to short.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available