mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-27 11:38:58 +06:00
Code Issues Packages Projects Releases Wiki Activity
c7f58145fb
keychron_qmk_firmware/keyboards/edda
History
Ryan ace372d90d
Move matrix config to info.json, part 3 (#19991) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-03-11 00:34:34 +11:00
..
keymaps
config.h Move matrix config to info.json, part 3 (#19991) 2023-03-11 00:34:34 +11:00
edda.c
edda.h
info.json Move matrix config to info.json, part 3 (#19991) 2023-03-11 00:34:34 +11:00
readme.md
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Edda PCB

Alice layout PCB with top mounted USB C used in Mekanisk Edda

Make example for this keyboard (after setting up your build environment):

make edda:default

Flashing example for this keyboard:

make edda:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, disconnect the keyboard from your PC and reconnect it.