mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-04 06:47:50 +06:00
c7d0262be7
* add discipad * Update driver_installation_zadig.md * Update keyboards/coseyfannitutti/discipad/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/coseyfannitutti/discipad/readme.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update rules.mk * Update keyboards/coseyfannitutti/discipad/rules.mk Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update docs/driver_installation_zadig.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/coseyfannitutti/discipad/discipad.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update docs/driver_installation_zadig.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update docs/driver_installation_zadig.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update rules.mk * Update discipad.c * Update driver_installation_zadig.md * Update config.h
35 lines
1.5 KiB
Makefile
35 lines
1.5 KiB
Makefile
# MCU name
|
|
MCU = atmega328p
|
|
|
|
# Bootloader selection
|
|
BOOTLOADER = USBasp
|
|
|
|
# Flash program via avrdude, but default command is not suitable.
|
|
# You can use coseyfannitutti/discipad:default:program
|
|
PROGRAM_CMD = avrdude -c usbasp -p m328p -U flash:w:$(BUILD_DIR)/$(TARGET).hex
|
|
|
|
# disable debug code
|
|
OPT_DEFS = -DDEBUG_LEVEL=0
|
|
|
|
|
|
# Build Options
|
|
# change yes to no to disable
|
|
#
|
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
NKRO_ENABLE = no # USB Nkey Rollover
|
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
|
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
|
UNICODE_ENABLE = no # Unicode
|
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
|
AUDIO_ENABLE = no # Audio output on port C6
|
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|