mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-25 18:06:34 +06:00

History

Jared Hendry 1522d97c2b Add support for YMD75 rev 2 (#8853 )		2020-04-20 00:58:58 +01:00
..
keymaps/default	Add support for YMD75 rev 2 (#8853 )	2020-04-20 00:58:58 +01:00
rev1	Add support for YMD75 rev 2 (#8853 )	2020-04-20 00:58:58 +01:00
rev2	Add support for YMD75 rev 2 (#8853 )	2020-04-20 00:58:58 +01:00
config.h	Add support for YMD75 rev 2 (#8853 )	2020-04-20 00:58:58 +01:00
info.json
README.md	Add support for YMD75 rev 2 (#8853 )	2020-04-20 00:58:58 +01:00
rules.mk	Add support for YMD75 rev 2 (#8853 )	2020-04-20 00:58:58 +01:00
ymd75.c	Add support for YMD75 rev 2 (#8853 )	2020-04-20 00:58:58 +01:00
ymd75.h	Add support for YMD75 rev 2 (#8853 )	2020-04-20 00:58:58 +01:00

README.md

YMD75 / MT84

75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.

Keyboard Maintainer: Wayne K Jones
Hardware Supported: YMD75/MT84 (rev1 and rev2) with the ATmega32a chip.
Hardware Availability: https://www.aliexpress.com/item/32812690592.html

Make example for this keyboard (after setting up your build environment):

make ymd75/rev1:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make ymd75/rev1:default:flash

Reset Key: Hold down the key located at Key below the top right key, commonly programmed as Backspace while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding L_CTRL while plugging in the keyboard.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.