mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-12 21:25:33 +06:00
123 lines
3.9 KiB
Plaintext
123 lines
3.9 KiB
Plaintext
PS/2 to USB keyboard converter
|
|
==============================
|
|
This firmware converts PS/2 keyboard protocol to USB and supports only Scan Code Set 2.
|
|
This will works on USB AVR(ATMega32U4, AT90USB) or V-USB(ATMega168, 328...).
|
|
|
|
|
|
Features
|
|
--------
|
|
Mouse keys
|
|
You can emulates mouse move and button click using keyboard.
|
|
System/Media control
|
|
You can sends Power event, Volume down/up and Mute.
|
|
USB NKRO(actually 120KRO+8Modifiers)
|
|
You can tolggles NKRO feature.
|
|
Keymap customization
|
|
You can customize keymaps easily by editing source code. See keymap.c.
|
|
|
|
|
|
PS/2 signal handling implementations
|
|
------------------------------------
|
|
Following three methods are used to implement PS/2 signal handling.
|
|
a. Simple and stupid busy-wait(ps2.c)
|
|
This is expected to implemented with portable C code for reference.
|
|
b. Interrupt driven(ps2.c)
|
|
Uses external interrupt to detect falling edge of clock line.
|
|
c. USART hardware module(ps2_usart.c)
|
|
Uses AVR USART engine to recevie PS/2 signal. Recomended and default.
|
|
This is required to work with V-USB, preceding two methods tend to
|
|
miss signal edges while V-USB handles USB.
|
|
|
|
To select method edit Makefile.
|
|
|
|
|
|
Connect Wires
|
|
-------------
|
|
In case of Teensy2.0(ATMega32U4):
|
|
0. Connect Vcc and GND.
|
|
1. Connect Clock and Data line.
|
|
For a. Clock is on PF0 and Data on PF1.
|
|
For b. Clock is on PD1 and Data on PD2.
|
|
For c. Clock is on PD5 and Data on PD2.
|
|
2. Optionally you need pull-up register. 1K-10K Ohm is OK.
|
|
|
|
To change pin configuration edit config.h.
|
|
|
|
|
|
Build Frimware
|
|
--------------
|
|
1. Edit Makefile for build options and MCU setting.
|
|
Use 'atmega32u4' for Teensy 2.0 or 'at90usb1286' for Teensy++ 2.0.
|
|
2. make
|
|
Just type `make` in a terminal.
|
|
Use `-f Makefile.vusb` option to build V-USB converter.
|
|
Use `-f Makefile.jis` option to use JIS keyboard.
|
|
3. program MCU.
|
|
In case of Teensy use `Teensy Loader`.(http://www.pjrc.com/teensy/loader.html)
|
|
Otherwise you want to use `avrdude` or `dfu-programmer`.
|
|
|
|
|
|
Demonstration of Features
|
|
-------------------------
|
|
In default configuration, you can try several keymaps, mousekeys and USB NKRO.
|
|
Use following magic key combinations to enable some features.
|
|
|
|
keymaps and NKRO:
|
|
Magic+0: Qwerty with mousekeys(default)
|
|
Magic+1: Qwerty without mousekeys
|
|
Magic+2: Colemak
|
|
Magic+3: Dvorak
|
|
Magic+4: Workman
|
|
Magic+N: toggles NKRO/6KRO(6KRO by default)
|
|
Magic+Esc: sends Power Event(Power button)
|
|
|
|
where Magic=(LShift+RShift) or (LControl+RShift)
|
|
|
|
Fn layer function:
|
|
Fn0+(hjkl): Mousekey move(vi cursor like)
|
|
Fn0+(yuio): Mouse wheel(left,down,up,right)
|
|
Fn0+space: Mouse left button
|
|
Fn0+(mnb): Mouse buttons(m=left, n=right, b=middle)
|
|
Fn0+(zxc): Media control(Volup, Voldown, Mute)
|
|
Fn1+(hjkl): Cursor move(vi cursor like)
|
|
Fn1+(nm,.): Cursor move(Home,PageDown,PageUp,End)
|
|
|
|
where Fn0=;, Fn1=/
|
|
|
|
|
|
Keymap
|
|
------
|
|
You can change a keymap by editing code of keymap. See common/keycode.h for key symbols.
|
|
|
|
|
|
V-USB Support
|
|
-------------
|
|
You can also use this converter on ATmega(168/328) with V-USB instead of Teensy.
|
|
The converter on V-USB lacks some features for now: USB NKRO and System/Media control.
|
|
|
|
Circuit
|
|
-------
|
|
+---+ +---------------+
|
|
USB GND | | ATmega168 |
|
|
=== C3 | |
|
|
5V <-------+--------+---|Vcc,AVCC | PS/2
|
|
R1 | | ====
|
|
D- <----+--+-----R2-----|INT1 RXD|------->DATA
|
|
D+ <----|---+----R3-----|INT0 XCK|------->CLOCK
|
|
Z1 Z2 | | ->5V
|
|
GND<----+---+--+--+-----|GND | ->GND
|
|
| | | |
|
|
| C2-+--|XTAL1 |
|
|
| X1 | |
|
|
+--C3-+--|XTAL2 |
|
|
+---------------+
|
|
R1: 1.5K Ohm
|
|
R2,R3: 68 Ohm
|
|
Z1,Z2: Zenner 3.6V
|
|
C1,C2: 22pF
|
|
C3: 0.1uF
|
|
X1: Crystal 20MHz(16MHz/12MHz)
|
|
|
|
|
|
EOF
|