mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-23 00:47:02 +06:00
Code Issues Packages Projects Releases Wiki Activity
c1d9f9911c
keychron_qmk_firmware/builddefs/bootloader.mk
Stefan Kerkmann d717396708
[Core] Add Raspberry Pi RP2040 support (#14877) 
* Disable RESET keycode because of naming conflicts

* Add Pico SDK as submodule

* Add RP2040 build support to QMK

* Adjust USB endpoint structs for RP2040

* Add RP2040 bootloader and double-tap reset routine

* Add generic and pro micro RP2040 boards

* Add RP2040 onekey keyboard

* Add WS2812 PIO DMA enabled driver and documentation

Supports regular and open-drain output configuration. RP2040 GPIOs are
sadly not 5V tolerant, so this is a bit use-less or needs extra hardware
or you take the risk to fry your hardware.

* Adjust SIO Driver for RP2040

* Adjust I2C Driver for RP2040

* Adjust SPI Driver for RP2040

* Add PIO serial driver and documentation

* Add general RP2040 documentation

* Apply suggestions from code review

Co-authored-by: Nick Brassel <nick@tzarc.org>

Co-authored-by: Nick Brassel <nick@tzarc.org>
2022-06-30 13:19:27 +02:00

223 lines
7.0 KiB
Makefile
Raw Blame History

# Copyright 2017 Jack Humbert
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# If it's possible that multiple bootloaders can be used for one project,
# you can leave this unset, and the correct size will be selected
# automatically.
#
# Sets the bootloader defined in the keyboard's/keymap's rules.mk
# Current options:
#
# AVR:
# halfkay PJRC Teensy
# caterina Pro Micro (Sparkfun/generic)
# atmel-dfu Atmel factory DFU
# lufa-dfu LUFA DFU
# qmk-dfu QMK DFU (LUFA + blinkenlight)
# qmk-hid QMK HID (LUFA + blinkenlight)
# bootloadhid HIDBootFlash compatible (ATmega32A)
# usbasploader USBaspLoader (ATmega328P)
# ARM:
# halfkay PJRC Teensy
# kiibohd Input:Club Kiibohd bootloader (only used on their boards)
# stm32duino STM32Duino (STM32F103x8)
# stm32-dfu STM32 USB DFU in ROM
# apm32-dfu APM32 USB DFU in ROM
# RISC-V:
# gd32v-dfu GD32V USB DFU in ROM
#
# If you need to provide your own implementation, you can set inside `rules.mk`
# `BOOTLOADER = custom` -- you'll need to provide your own implementations. See
# the respective file under `platforms/<PLATFORM>/bootloaders/custom.c` to see
# which functions may be overridden.
#
# BOOTLOADER_SIZE can still be defined manually, but it's recommended
# you add any possible configuration to this list
ifeq ($(strip $(BOOTLOADER)), custom)
OPT_DEFS += -DBOOTLOADER_CUSTOM
BOOTLOADER_TYPE = custom
endif
ifeq ($(strip $(BOOTLOADER)), atmel-dfu)
OPT_DEFS += -DBOOTLOADER_ATMEL_DFU
OPT_DEFS += -DBOOTLOADER_DFU
BOOTLOADER_TYPE = dfu
ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
BOOTLOADER_SIZE = 4096
endif
ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
BOOTLOADER_SIZE = 8192
endif
endif
ifeq ($(strip $(BOOTLOADER)), lufa-dfu)
OPT_DEFS += -DBOOTLOADER_LUFA_DFU
OPT_DEFS += -DBOOTLOADER_DFU
BOOTLOADER_TYPE = dfu
ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
BOOTLOADER_SIZE ?= 4096
endif
ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
BOOTLOADER_SIZE ?= 8192
endif
endif
ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
OPT_DEFS += -DBOOTLOADER_QMK_DFU
OPT_DEFS += -DBOOTLOADER_DFU
BOOTLOADER_TYPE = dfu
ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
BOOTLOADER_SIZE ?= 4096
endif
ifneq (,$(filter $(MCU), at90usb1286 at90usb1287))
BOOTLOADER_SIZE ?= 8192
endif
endif
ifeq ($(strip $(BOOTLOADER)), qmk-hid)
OPT_DEFS += -DBOOTLOADER_QMK_HID
OPT_DEFS += -DBOOTLOADER_HID
BOOTLOADER_TYPE = dfu
BOOTLOADER_SIZE ?= 4096
endif
ifeq ($(strip $(BOOTLOADER)), halfkay)
OPT_DEFS += -DBOOTLOADER_HALFKAY
BOOTLOADER_TYPE = halfkay
# Teensy 2.0
ifeq ($(strip $(MCU)), atmega32u4)
BOOTLOADER_SIZE = 512
endif
# Teensy 2.0++
ifeq ($(strip $(MCU)), at90usb1286)
BOOTLOADER_SIZE = 1024
endif
# Teensy LC, 3.x
ifneq (,$(filter $(MCU_ORIG), MKL26Z64 MK20DX128 MK20DX256 MK66FX1M0))
FIRMWARE_FORMAT = hex
endif
endif
ifeq ($(strip $(BOOTLOADER)), caterina)
OPT_DEFS += -DBOOTLOADER_CATERINA
BOOTLOADER_TYPE = caterina
BOOTLOADER_SIZE = 4096
endif
ifneq (,$(filter $(BOOTLOADER), bootloadhid bootloadHID))
OPT_DEFS += -DBOOTLOADER_BOOTLOADHID
BOOTLOADER_TYPE = bootloadhid
BOOTLOADER_SIZE = 4096
endif
ifneq (,$(filter $(BOOTLOADER), usbasploader USBasp))
OPT_DEFS += -DBOOTLOADER_USBASP
BOOTLOADER_TYPE = usbasploader
BOOTLOADER_SIZE = 4096
endif
ifeq ($(strip $(BOOTLOADER)), lufa-ms)
OPT_DEFS += -DBOOTLOADER_MS
BOOTLOADER_TYPE = dfu
BOOTLOADER_SIZE ?= 8192
FIRMWARE_FORMAT = bin
cpfirmware: lufa_warning
.INTERMEDIATE: lufa_warning
lufa_warning: $(FIRMWARE_FORMAT)
$(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@)
$(info LUFA MASS STORAGE Bootloader selected)
$(info DO NOT USE THIS BOOTLOADER IN NEW PROJECTS!)
$(info It is extremely prone to bricking, and is only included to support existing boards.)
$(info @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@)
endif
ifdef BOOTLOADER_SIZE
OPT_DEFS += -DBOOTLOADER_SIZE=$(strip $(BOOTLOADER_SIZE))
endif
ifeq ($(strip $(BOOTLOADER)), stm32-dfu)
OPT_DEFS += -DBOOTLOADER_STM32_DFU
BOOTLOADER_TYPE = stm32_dfu
# Options to pass to dfu-util when flashing
DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave
DFU_SUFFIX_ARGS ?= -v 0483 -p DF11
endif
ifeq ($(strip $(BOOTLOADER)), apm32-dfu)
OPT_DEFS += -DBOOTLOADER_APM32_DFU
BOOTLOADER_TYPE = stm32_dfu
# Options to pass to dfu-util when flashing
DFU_ARGS ?= -d 314B:0106 -a 0 -s 0x08000000:leave
DFU_SUFFIX_ARGS ?= -v 314B -p 0106
endif
ifeq ($(strip $(BOOTLOADER)), gd32v-dfu)
OPT_DEFS += -DBOOTLOADER_GD32V_DFU
BOOTLOADER_TYPE = gd32v_dfu
# Options to pass to dfu-util when flashing
DFU_ARGS ?= -d 28E9:0189 -a 0 -s 0x08000000:leave
DFU_SUFFIX_ARGS ?= -v 28E9 -p 0189
endif
ifeq ($(strip $(BOOTLOADER)), kiibohd)
OPT_DEFS += -DBOOTLOADER_KIIBOHD
BOOTLOADER_TYPE = kiibohd
ifeq ($(strip $(MCU_ORIG)), MK20DX128)
MCU_LDSCRIPT = MK20DX128BLDR4
endif
ifeq ($(strip $(MCU_ORIG)), MK20DX256)
MCU_LDSCRIPT = MK20DX256BLDR8
endif
# Options to pass to dfu-util when flashing
DFU_ARGS = -d 1C11:B007
DFU_SUFFIX_ARGS = -v 1C11 -p B007
endif
ifeq ($(strip $(BOOTLOADER)), stm32duino)
OPT_DEFS += -DBOOTLOADER_STM32DUINO
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = STM32_F103_STM32DUINO
BOOTLOADER_TYPE = stm32duino
# Options to pass to dfu-util when flashing
DFU_ARGS = -d 1EAF:0003 -a 2 -R
DFU_SUFFIX_ARGS = -v 1EAF -p 0003
endif
ifeq ($(strip $(BOOTLOADER)), tinyuf2)
OPT_DEFS += -DBOOTLOADER_TINYUF2
BOOTLOADER_TYPE = tinyuf2
endif
ifeq ($(strip $(BOOTLOADER)), rp2040)
OPT_DEFS += -DBOOTLOADER_RP2040
BOOTLOADER_TYPE = rp2040
endif
ifeq ($(strip $(BOOTLOADER)), halfkay)
OPT_DEFS += -DBOOTLOADER_HALFKAY
BOOTLOADER_TYPE = halfkay
endif
ifeq ($(strip $(BOOTLOADER)), md-boot)
OPT_DEFS += -DBOOTLOADER_MD_BOOT
BOOTLOADER_TYPE = md_boot
endif
ifeq ($(strip $(BOOTLOADER)), wb32-dfu)
OPT_DEFS += -DBOOTLOADER_WB32_DFU
BOOTLOADER_TYPE = wb32_dfu
endif
ifeq ($(strip $(BOOTLOADER_TYPE)),)
$(call CATASTROPHIC_ERROR,Invalid BOOTLOADER,No bootloader specified. Please set an appropriate 'BOOTLOADER' in your keyboard's 'rules.mk' file.)
endif
Reference in New Issue View Git Blame Copy Permalink