mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-27 19:16:40 +06:00
Code Issues Packages Projects Releases Wiki Activity
c1556f7af0
keychron_qmk_firmware/keyboards/xiudi/xd002
History
peepeetee c5f1e9797a
rename kprepublic bm keyboards to have a standardized naming format (#15047) 
* change missed kprepublic readmes

* fix xiudi readmes

* initial change, see pr description

* change readmes

* changes names in readmes and device descriptors
2021-11-18 08:37:23 +11:00
..
keymaps
.noci
config.h
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
readme.md rename kprepublic bm keyboards to have a standardized naming format (#15047) 2021-11-18 08:37:23 +11:00
rules.mk Remove redundant UNICODE_ENABLE = no in keyboard-level rules.mk (#14633) 2021-09-30 08:14:21 +10:00
xd002.c
xd002.h

readme.md

xd002

xd002

2% Custom mechanical keyboard. ATtiny85 powered, with 2*WS2812 LEDs, and the micronucleus bootloader.

Note: Due to limited firmware space, a lot of features have to be disabled to get a functioning QMK based keyboard.

  • Keyboard Maintainer: zvecr
  • Hardware Supported: xd002
  • Hardware Availability: kprepublic

Make example for this keyboard (after setting up your build environment):

make xiudi/xd002:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Flashing

Prerequisites

git clone https://github.com/micronucleus/micronucleus.git
cd micronucleus/commandline/
sudo make install

On Linux, you’ll need proper privileges to access the MCU. You can either use sudo when flashing firmware, or place these files in /etc/udev/rules.d/. Once added run the following:

sudo udevadm control --reload-rules
sudo udevadm trigger

Instructions

Reset Key: Hold down key nearest to the USB socket while plugging in the keyboard.

make xiudi/xd002:default:flash

# or directly with...
micronucleus --run <firmware.hex>

Recovery