mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-25 18:06:34 +06:00
56555c61e1
* Migrate `LAYOUTS` to data driven, 0-9 * Migrate `LAYOUTS` to data driven, A * Migrate `LAYOUTS` to data driven, B * Migrate `LAYOUTS` to data driven, C * Migrate `LAYOUTS` to data driven, D * Migrate `LAYOUTS` to data driven, E * Migrate `LAYOUTS` to data driven, F * Migrate `LAYOUTS` to data driven, G * Migrate `LAYOUTS` to data driven, H * Migrate `LAYOUTS` to data driven, handwired * Migrate `LAYOUTS` to data driven, I * Migrate `LAYOUTS` to data driven, J * Migrate `LAYOUTS` to data driven, K * Migrate `LAYOUTS` to data driven, L * Migrate `LAYOUTS` to data driven, M * Migrate `LAYOUTS` to data driven, N * Migrate `LAYOUTS` to data driven, O * Migrate `LAYOUTS` to data driven, P * Migrate `LAYOUTS` to data driven, Q * Migrate `LAYOUTS` to data driven, R * Migrate `LAYOUTS` to data driven, S * Migrate `LAYOUTS` to data driven, T * Migrate `LAYOUTS` to data driven, U * Migrate `LAYOUTS` to data driven, V * Migrate `LAYOUTS` to data driven, W * Migrate `LAYOUTS` to data driven, X * Migrate `LAYOUTS` to data driven, Y * Migrate `LAYOUTS` to data driven, Z
37 lines
1.2 KiB
Makefile
37 lines
1.2 KiB
Makefile
# MCU name
|
|
MCU = STM32F103
|
|
|
|
# Bootloader selection
|
|
# Cannot use `BOOTLOADER = stm32duino` due to the need to override
|
|
# `MCU_LDSCRIPT`, therefore all parameters need to be specified here manually.
|
|
OPT_DEFS += -DBOOTLOADER_STM32DUINO
|
|
MCU_LDSCRIPT = STM32F103xB_stm32duino_bootloader
|
|
BOARD = STM32_F103_STM32DUINO
|
|
BOOTLOADER_TYPE = stm32duino
|
|
DFU_ARGS = -d 1EAF:0003 -a 2 -R
|
|
DFU_SUFFIX_ARGS = -v 1EAF -p 0003
|
|
|
|
# Build Options
|
|
# change yes to no to disable
|
|
#
|
|
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
|
MOUSEKEY_ENABLE = no # Mouse keys
|
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
|
CONSOLE_ENABLE = no # Console for debug
|
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
|
NKRO_ENABLE = yes # Enable N-Key Rollover
|
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
|
AUDIO_ENABLE = no # Audio output
|
|
|
|
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
|
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
|
|
|
# RGB Matrix enabled
|
|
RGB_MATRIX_ENABLE = yes
|
|
RGB_MATRIX_DRIVER = WS2812
|
|
|
|
# Wear-levelling driver
|
|
EEPROM_DRIVER = wear_leveling
|
|
WEAR_LEVELING_DRIVER = embedded_flash
|