mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-29 21:08:38 +06:00
|
…
|
||
|---|---|---|
| .. | ||
| v0x | ||
| v0x_dualencoder | ||
| v0x_right | ||
| v1x | ||
| v1x_dualencoder | ||
| v1x_oled | ||
| v1x_right | ||
| config.h | ||
| readme.md | ||
| rules.mk | ||
dumbpad
dumbpad is a num/macro pad available in two major form factors - single- and dual-rotary encoder.
- Single-encoder PCBs are reversible - components can be soldered to either side to allow the encoder to be on either the left or right side.
- Dual-encoder PCBs come in two versions - one with the encoders in the bottom corners, the otherin the top corners
Support for dumbpad all PCB revisions can be found in this directory.
- Maintainer: imchipwood
- PCB repository: dumbpad on github
- PCB revisions:
- v0.x - these revisions have two LEDs for layer indication
- 'v0x': Default setup for single rotary encoder v0.x PCBs
- 'v0x_right': Same as v0x but with rotary encoder on right side (components on bottom of PCB)
- 'v0x_dualencoder': Dual-encoder PCBs
- v1.x - these revisions have three LEDs - two for layer indication, one for numlock indication
- 'v1x': Default setup for v1.x PCBs with a single rotary encoder on the left side
- 'v1x_right': Same as v1x but with rotary encoder on right side (components on bottom of PCB)
- 'v1x_dualencoder': v1x PCB with two rotary encoders
- v0.x - these revisions have two LEDs for layer indication
- PCB revisions: