mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-29 04:06:59 +06:00
e9bd7d7ad3
* remove i2c_start and i2c_stop from i2c drivers * remove static i2c_address variable from chibios i2c driver
428 lines
13 KiB
C
428 lines
13 KiB
C
/*
|
|
* Copyright (C) 2021 System76
|
|
* Copyright (C) 2021 Jimmy Cassis <KernelOops@outlook.com>
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "usb_mux.h"
|
|
|
|
#include <stdbool.h>
|
|
|
|
#include "i2c_master.h"
|
|
#include "wait.h"
|
|
|
|
#define REG_PF1_CTL 0xBF800C04
|
|
#define REG_PIO64_OEN 0xBF800908
|
|
#define REG_PIO64_OUT 0xBF800928
|
|
#define REG_VID 0xBF803000
|
|
#define REG_PRT_SWAP 0xBF8030FA
|
|
#define REG_USB3_HUB_VID 0xBFD2E548
|
|
#define REG_RUNTIME_FLAGS2 0xBFD23408
|
|
#define REG_I2S_FEAT_SEL 0xBFD23412
|
|
|
|
struct USB7206 {
|
|
uint8_t addr;
|
|
};
|
|
|
|
struct USB7206 usb_hub = {.addr = 0x2D};
|
|
|
|
// Perform USB7206 register access.
|
|
// Returns zero on success or a negative number on error.
|
|
i2c_status_t usb7206_register_access(struct USB7206* self) {
|
|
uint8_t register_access[3] = {
|
|
0x99,
|
|
0x37,
|
|
0x00,
|
|
};
|
|
|
|
return i2c_transmit(self->addr << 1, register_access, sizeof(register_access), I2C_TIMEOUT);
|
|
}
|
|
|
|
// Read data from USB7206 register region.
|
|
// Returns number of bytes read on success or a negative number on error.
|
|
i2c_status_t usb7206_read_reg(struct USB7206* self, uint32_t addr, uint8_t* data, int length) {
|
|
i2c_status_t status;
|
|
|
|
uint8_t register_read[9] = {
|
|
0x00, // Buffer address MSB: always 0
|
|
0x00, // Buffer address LSB: always 0
|
|
0x06, // Number of bytes to write to command block buffer area
|
|
0x01, // Direction: 0 = write, 1 = read
|
|
(uint8_t)length, // Number of bytes to read from register
|
|
(uint8_t)(addr >> 24), // Register address byte 3
|
|
(uint8_t)(addr >> 16), // Register address byte 2
|
|
(uint8_t)(addr >> 8), // Register address byte 1
|
|
(uint8_t)(addr >> 0), // Register address byte 0
|
|
};
|
|
|
|
status = i2c_transmit(self->addr << 1, register_read, sizeof(register_read), I2C_TIMEOUT);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
status = usb7206_register_access(self);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
uint16_t read = 0x0006; // Buffer address 6 to skip header
|
|
uint8_t data_with_buffer_length[length];
|
|
status = i2c_readReg16((self->addr << 1), read, data_with_buffer_length, length, I2C_TIMEOUT);
|
|
|
|
for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) {
|
|
data[i] = data_with_buffer_length[i+1];
|
|
}
|
|
|
|
return (status < 0) ? status : length;
|
|
}
|
|
|
|
// Read 32-bit value from USB7206 register region.
|
|
// Returns number of bytes read on success or a negative number on error.
|
|
i2c_status_t usb7206_read_reg_32(struct USB7206* self, uint32_t addr, uint32_t* data) {
|
|
i2c_status_t status;
|
|
|
|
// First byte is available length
|
|
uint8_t bytes[4] = {0, 0, 0, 0};
|
|
|
|
status = usb7206_read_reg(self, addr, bytes, sizeof(bytes));
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
// Convert from little endian
|
|
*data = (((uint32_t)bytes[0]) << 0) | (((uint32_t)bytes[1]) << 8) | (((uint32_t)bytes[2]) << 16) | (((uint32_t)bytes[3]) << 24);
|
|
|
|
return status;
|
|
}
|
|
|
|
// Write data to USB7206 register region.
|
|
// Returns number of bytes written on success or a negative number on error.
|
|
i2c_status_t usb7206_write_reg(struct USB7206* self, uint32_t addr, uint8_t* data, int length) {
|
|
i2c_status_t status;
|
|
|
|
uint8_t register_write[9] = {
|
|
0x00, // Buffer address MSB: always 0
|
|
0x00, // Buffer address LSB: always 0
|
|
((uint8_t)length) + 6, // Number of bytes to write to command block buffer area
|
|
0x00, // Direction: 0 = write, 1 = read
|
|
(uint8_t)length, // Number of bytes to write to register
|
|
(uint8_t)(addr >> 24), // Register address byte 3
|
|
(uint8_t)(addr >> 16), // Register address byte 2
|
|
(uint8_t)(addr >> 8), // Register address byte 1
|
|
(uint8_t)(addr >> 0), // Register address byte 0
|
|
};
|
|
uint8_t send_buffer_length = sizeof(register_write) + length;
|
|
uint8_t send_buffer[send_buffer_length];
|
|
uint8_t j = 0;
|
|
|
|
for (uint16_t i = 0; i < sizeof(register_write); i++) {
|
|
send_buffer[j++] = register_write[i];
|
|
}
|
|
|
|
for (uint16_t i = 0; i < length; i++) {
|
|
send_buffer[j++] = data[i];
|
|
}
|
|
|
|
status = i2c_transmit((self->addr << 1), send_buffer, send_buffer_length, I2C_TIMEOUT);
|
|
|
|
status = usb7206_register_access(self);
|
|
|
|
return (status < 0) ? status : length;
|
|
}
|
|
|
|
// Write 8-bit value to USB7206 register region.
|
|
// Returns number of bytes written on success or a negative number on error.
|
|
i2c_status_t usb7206_write_reg_8(struct USB7206* self, uint32_t addr, uint8_t data) { return usb7206_write_reg(self, addr, &data, sizeof(data)); }
|
|
|
|
// Write 32-bit value to USB7206 register region.
|
|
// Returns number of bytes written on success or a negative number on error.
|
|
i2c_status_t usb7206_write_reg_32(struct USB7206* self, uint32_t addr, uint32_t data) {
|
|
// Convert to little endian
|
|
uint8_t bytes[4] = {
|
|
(uint8_t)(data >> 0),
|
|
(uint8_t)(data >> 8),
|
|
(uint8_t)(data >> 16),
|
|
(uint8_t)(data >> 24),
|
|
};
|
|
|
|
return usb7206_write_reg(self, addr, bytes, sizeof(bytes));
|
|
}
|
|
|
|
// Initialize USB7206.
|
|
// Returns zero on success or a negative number on error.
|
|
int usb7206_init(struct USB7206* self) {
|
|
i2c_status_t status;
|
|
uint32_t data;
|
|
|
|
// DM and DP are swapped on ports 2 and 3
|
|
status = usb7206_write_reg_8(self, REG_PRT_SWAP, 0x0C);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
// Disable audio
|
|
status = usb7206_write_reg_8(self, REG_I2S_FEAT_SEL, 0);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
// Set HFC_DISABLE
|
|
data = 0;
|
|
status = usb7206_read_reg_32(self, REG_RUNTIME_FLAGS2, &data);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
data |= 1;
|
|
status = usb7206_write_reg_32(self, REG_RUNTIME_FLAGS2, data);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
// Set Vendor ID and Product ID of USB 2 hub
|
|
status = usb7206_write_reg_32(self, REG_VID, 0x00033384);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
// Set Vendor ID and Product ID of USB 3 hub
|
|
status = usb7206_write_reg_32(self, REG_USB3_HUB_VID, 0x00043384);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
// Attach USB7206.
|
|
// Returns bytes written on success or a negative number on error.
|
|
i2c_status_t usb7206_attach(struct USB7206* self) {
|
|
uint8_t data[3] = {
|
|
0xAA,
|
|
0x56,
|
|
0x00,
|
|
};
|
|
|
|
return i2c_transmit(self->addr << 1, data, sizeof(data), I2C_TIMEOUT);
|
|
}
|
|
|
|
struct USB7206_GPIO {
|
|
struct USB7206* usb7206;
|
|
uint32_t pf;
|
|
};
|
|
|
|
struct USB7206_GPIO usb_gpio_sink = {.usb7206 = &usb_hub, .pf = 29}; // UP_SEL = PF29 = GPIO93
|
|
struct USB7206_GPIO usb_gpio_source_left = {.usb7206 = &usb_hub, .pf = 10}; // CL_SEL = PF10 = GPIO74
|
|
struct USB7206_GPIO usb_gpio_source_right = {.usb7206 = &usb_hub, .pf = 25}; // CR_SEL = PF25 = GPIO88
|
|
|
|
// Set USB7206 GPIO to specified value.
|
|
// Returns zero on success or negative number on error.
|
|
i2c_status_t usb7206_gpio_set(struct USB7206_GPIO* self, bool value) {
|
|
i2c_status_t status;
|
|
uint32_t data;
|
|
|
|
data = 0;
|
|
status = usb7206_read_reg_32(self->usb7206, REG_PIO64_OUT, &data);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
if (value) {
|
|
data |= (((uint32_t)1) << self->pf);
|
|
} else {
|
|
data &= ~(((uint32_t)1) << self->pf);
|
|
}
|
|
status = usb7206_write_reg_32(self->usb7206, REG_PIO64_OUT, data);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
// Initialize USB7206 GPIO.
|
|
// Returns zero on success or a negative number on error.
|
|
i2c_status_t usb7206_gpio_init(struct USB7206_GPIO* self) {
|
|
i2c_status_t status;
|
|
uint32_t data;
|
|
|
|
// Set programmable function to GPIO
|
|
status = usb7206_write_reg_8(self->usb7206, REG_PF1_CTL + (self->pf - 1), 0);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
// Set GPIO to false by default
|
|
usb7206_gpio_set(self, false);
|
|
|
|
// Set GPIO to output
|
|
data = 0;
|
|
status = usb7206_read_reg_32(self->usb7206, REG_PIO64_OEN, &data);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
data |= (((uint32_t)1) << self->pf);
|
|
status = usb7206_write_reg_32(self->usb7206, REG_PIO64_OEN, data);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct PTN5110 {
|
|
uint8_t addr;
|
|
uint8_t cc;
|
|
struct USB7206_GPIO* gpio;
|
|
};
|
|
|
|
struct PTN5110 usb_sink = {.addr = 0x51, .gpio = &usb_gpio_sink};
|
|
struct PTN5110 usb_source_left = {.addr = 0x52, .gpio = &usb_gpio_source_left};
|
|
struct PTN5110 usb_source_right = {.addr = 0x50, .gpio = &usb_gpio_source_right};
|
|
|
|
// Initialize PTN5110.
|
|
// Returns zero on success or a negative number on error.
|
|
i2c_status_t ptn5110_init(struct PTN5110* self) {
|
|
// Set last cc to invalid value, to force update
|
|
self->cc = 0xFF;
|
|
// Initialize GPIO
|
|
return usb7206_gpio_init(self->gpio);
|
|
}
|
|
|
|
// Read PTN5110 CC_STATUS.
|
|
// Returns zero on success or a negative number on error.
|
|
i2c_status_t ptn5110_get_cc_status(struct PTN5110* self, uint8_t* cc) { return i2c_read_register(self->addr << 1, 0x1D, cc, 1, I2C_TIMEOUT); }
|
|
|
|
// Set PTN5110 SSMUX orientation.
|
|
// Returns zero on success or a negative number on error.
|
|
i2c_status_t ptn5110_set_ssmux(struct PTN5110* self, bool orientation) { return usb7206_gpio_set(self->gpio, orientation); }
|
|
|
|
// Write PTN5110 COMMAND.
|
|
// Returns zero on success or negative number on error.
|
|
i2c_status_t ptn5110_command(struct PTN5110* self, uint8_t command) { return i2c_write_register(self->addr << 1, 0x23, &command, 1, I2C_TIMEOUT); }
|
|
|
|
// Set orientation of PTN5110 operating as a sink, call this once.
|
|
// Returns zero on success or a negative number on error.
|
|
i2c_status_t ptn5110_sink_set_orientation(struct PTN5110* self) {
|
|
i2c_status_t status;
|
|
uint8_t cc;
|
|
|
|
status = ptn5110_get_cc_status(self, &cc);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
if ((cc & 0x03) == 0) {
|
|
status = ptn5110_set_ssmux(self, false);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
} else {
|
|
status = ptn5110_set_ssmux(self, true);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
// Update PTN5110 operating as a source, call this repeatedly.
|
|
// Returns zero on success or a negative number on error.
|
|
i2c_status_t ptn5110_source_update(struct PTN5110* self) {
|
|
i2c_status_t status;
|
|
uint8_t cc;
|
|
|
|
status = ptn5110_get_cc_status(self, &cc);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
if (cc != self->cc) {
|
|
// WARNING: Setting this here will disable retries
|
|
self->cc = cc;
|
|
|
|
bool connected = false;
|
|
bool orientation = false;
|
|
if ((cc & 0x03) == 2) {
|
|
connected = true;
|
|
orientation = true;
|
|
} else if (((cc >> 2) & 0x03) == 2) {
|
|
connected = true;
|
|
orientation = false;
|
|
}
|
|
|
|
if (connected) {
|
|
// Set SS mux orientation
|
|
status = ptn5110_set_ssmux(self, orientation);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
|
|
// Enable source Vbus command
|
|
status = ptn5110_command(self, 0b01110111);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
} else {
|
|
// Disable source Vbus command
|
|
status = ptn5110_command(self, 0b01100110);
|
|
if (status < 0) {
|
|
return status;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void usb_mux_event(void) {
|
|
// Run this on every 1000th matrix scan
|
|
static int cycle = 0;
|
|
if (cycle >= 1000) {
|
|
cycle = 0;
|
|
ptn5110_source_update(&usb_source_left);
|
|
ptn5110_source_update(&usb_source_right);
|
|
} else {
|
|
cycle += 1;
|
|
}
|
|
}
|
|
|
|
void usb_mux_init(void) {
|
|
// Run I2C bus at 100 kHz
|
|
i2c_init();
|
|
|
|
// Set up hub
|
|
usb7206_init(&usb_hub);
|
|
|
|
// Set up sink
|
|
ptn5110_init(&usb_sink);
|
|
ptn5110_sink_set_orientation(&usb_sink);
|
|
|
|
// Set up sources
|
|
ptn5110_init(&usb_source_left);
|
|
ptn5110_init(&usb_source_right);
|
|
|
|
// Attach hub
|
|
usb7206_attach(&usb_hub);
|
|
|
|
// Ensure orientation is correct after attaching hub
|
|
// TODO: Find reason why GPIO for sink orientation is reset
|
|
for (int i = 0; i < 100; i++) {
|
|
ptn5110_sink_set_orientation(&usb_sink);
|
|
wait_ms(10);
|
|
}
|
|
}
|