mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-27 11:38:58 +06:00
Code Issues Packages Projects Releases Wiki Activity
a6900dd5c5
keychron_qmk_firmware/keyboards/4pplet/perk60_iso
History
Ryan 56555c61e1
Migrate LAYOUTS to data driven (#19541) 
* Migrate `LAYOUTS` to data driven, 0-9

* Migrate `LAYOUTS` to data driven, A

* Migrate `LAYOUTS` to data driven, B

* Migrate `LAYOUTS` to data driven, C

* Migrate `LAYOUTS` to data driven, D

* Migrate `LAYOUTS` to data driven, E

* Migrate `LAYOUTS` to data driven, F

* Migrate `LAYOUTS` to data driven, G

* Migrate `LAYOUTS` to data driven, H

* Migrate `LAYOUTS` to data driven, handwired

* Migrate `LAYOUTS` to data driven, I

* Migrate `LAYOUTS` to data driven, J

* Migrate `LAYOUTS` to data driven, K

* Migrate `LAYOUTS` to data driven, L

* Migrate `LAYOUTS` to data driven, M

* Migrate `LAYOUTS` to data driven, N

* Migrate `LAYOUTS` to data driven, O

* Migrate `LAYOUTS` to data driven, P

* Migrate `LAYOUTS` to data driven, Q

* Migrate `LAYOUTS` to data driven, R

* Migrate `LAYOUTS` to data driven, S

* Migrate `LAYOUTS` to data driven, T

* Migrate `LAYOUTS` to data driven, U

* Migrate `LAYOUTS` to data driven, V

* Migrate `LAYOUTS` to data driven, W

* Migrate `LAYOUTS` to data driven, X

* Migrate `LAYOUTS` to data driven, Y

* Migrate `LAYOUTS` to data driven, Z
2023-01-10 02:48:20 +00:00
..
keymaps
rev_a Migrate LAYOUTS to data driven (#19541) 2023-01-10 02:48:20 +00:00
readme.md

readme.md

Perk60 ISO Rev A

  • Keyboard Maintainer: 4pplet
  • Hardware Supported: Perk60 ISO Rev A

Make example for this keyboard (after setting up your build environment):

make 4pplet/perk60_iso/rev_a:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

  • Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
  • Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.