keychron_qmk_firmware/lib/lufa/Projects/LEDNotifier/LEDNotifier.txt

64 lines
1.9 KiB
Plaintext

/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage USB LED Notifier Project
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* \li AT90USB646
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Device</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Communications Device Class (CDC)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Abstract Control Model (ACM)</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF CDC Class Standard</td>
* </tr>
* <tr>
* <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section Sec_Description Project Description:
*
* USB LED Notifier Project. This project is designed for the Busware BUI board, however it can run easily on any
* USB AVR. It is a generic RGB LED controller (via a three channel software PWM) which listens for commands from the
* host on a CDC virtual serial port. When new commands are received, it updates the board LEDs.
*
* This can be controlled with any host application that can write to the virtual serial port, allowing it to become
* a visual notification system for any number of custom host applications, such as a new unread email notifier.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/