mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-28 19:58:48 +06:00

History

Ryan 7e0299117b Move encoder config to data driven (#19923 ) Co-authored-by: Nick Brassel <nick@tzarc.org>		2023-02-26 09:45:12 +11:00
..
keymaps
config.h	Move encoder config to data driven (#19923 )	2023-02-26 09:45:12 +11:00
gfxfont.c
info.json	Move encoder config to data driven (#19923 )	2023-02-26 09:45:12 +11:00
readme.md
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00
static.c
static.h

readme.md

0xCB Static

Macro keypad

Keyboard Maintainer: Conor Burns
Hardware Supported: https://github.com/0xCB-dev/0xcb-static
Hardware Availability: On CandyKeys or order your own parts - the hardware in the repo is Open Source :D
PCB renders :)

More Pictures here

To go to bootloader press ESC while plugging in or hold the RESET switch, then hold the BOOT switch, release RESET, release BOOT. The board should now appear in lsusb (or device manager).

Make example for this keyboard (after setting up your build environment):

make 0xcb/static:default

Flashing example for this keyboard:

make 0xcb/static:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.