mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-27 19:16:40 +06:00
54 lines
2.0 KiB
Makefile
54 lines
2.0 KiB
Makefile
# project specific files
|
|
VPATH += keyboards/cannonkeys/bluepill
|
|
SRC = led.c \
|
|
keyboard.c
|
|
|
|
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
|
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
|
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
|
BOARD = GENERIC_STM32_F103
|
|
|
|
# OPT_DEFS =
|
|
# MCU_LDSCRIPT = STM32F103x8
|
|
# BOARD = GENERIC_STM32_F103
|
|
|
|
## chip/board settings
|
|
# the next two should match the directories in
|
|
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
MCU_FAMILY = STM32
|
|
MCU_SERIES = STM32F1xx
|
|
# linker script to use
|
|
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
# or <this_dir>/ld/
|
|
# startup code to use
|
|
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
MCU_STARTUP = stm32f1xx
|
|
# it should exist either in <chibios>/os/hal/boards/
|
|
# or <this_dir>/boards
|
|
# Cortex version
|
|
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
MCU = cortex-m3
|
|
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
ARMV = 7
|
|
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
|
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
|
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
|
# a custom board definition that you plan to reuse).
|
|
# If you're not setting it here, leave it commented out.
|
|
# It is chip dependent, the correct number can be looked up here (page 175):
|
|
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
|
# This also requires a patch to chibios:
|
|
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
|
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
|
|
|
|
|
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
|
CONSOLE_ENABLE = yes # Console for debug
|
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
|
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
|
NKRO_ENABLE = yes # USB Nkey Rollover
|
|
BACKLIGHT_ENABLE = yes
|
|
RGBLIGHT_ENABLE = yes
|