| .. | ||
| common | ||
| madromys | ||
| mouse | ||
| trackball | ||
| trackball_mini | ||
| trackball_nano | ||
| trackball_thumb | ||
| ploopyco.c | ||
| ploopyco.h | ||
| post_rules.mk | ||
| readme.md | ||
Ploopyco
Customizing your PloopyCo Device
There are a number of behavioral settings that you can use to help customize your experience
PLOOPY_IGNORE_SCROLL_CLICK |
not_defined | Ignores scroll wheel if it is pressed down. |
PLOOPY_SCROLL_DEBOUNCE |
5 |
Number of milliseconds between scroll events. |
PLOOPY_SCROLL_BUTTON_DEBOUNCE |
100 |
Time to ignore scroll events after pressing scroll wheel. |
DPI
You can change the DPI/CPI or speed of the trackball by calling pointing_device_set_cpi at any time. Additionally, there is a DPI_CONFIG macro that will cycle through an array of options for the DPI. This is set to 1200, 1600, and 2400, but can be changed. 1600 is also set to the default.
To configure/set your own array, there are two defines to use, PLOOPY_DPI_OPTIONS to set the array, and PLOOPY_DPI_DEFAULT.
#define PLOOPY_DPI_OPTIONS { 1200, 1600, 2400 }
#define PLOOPY_DPI_DEFAULT 1
The PLOOPY_DPI_OPTIONS array sets the values that you want to be able to cycle through, and the order they are in. The "default" define lets the firmware know which of these options is the default and should be loaded by default.
The DPI_CONFIG macro will cycle through the values in the array, each time you hit it. And it stores this value in persistent memory, so it will load it the next time the device powers up.
Drag Scroll
Drag Sroll is a custom keycode for the Ploopy devices that allow you to hold or tap a button and have the mouse movement translate into scrolling instead.
Nothing needs to be enabled to use this functionality. Just add the DRAG_SCROLL to your keymap.
Drag Scroll Configuration
#define PLOOPY_DRAGSCROLL_MOMENTARY- Makes the key into a momentary key, rather than a toggle.#define PLOOPY_DRAGSCROLL_DIVISOR_H 8.0- Sets the horizontal movement divisor to use when drag scroll is enabled.#define PLOOPY_DRAGSCROLL_DIVISOR_V 8.0- Sets the vertical movement divisor to use when drag scroll is enabled.#define PLOOPY_DRAGSCROLL_INVERT- This reverses the direction that the scroll is performed.