mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-30 21:38:01 +06:00
Code Issues Packages Projects Releases Wiki Activity
75e1a0d610
keychron_qmk_firmware/keyboards/4pplet/perk60_iso/rev_a
History
Ryan d56ee70c52
Rename DRIVER_ADDR_n defines (#22200) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-10-21 21:41:59 +10:00
..
config.h Rename DRIVER_ADDR_n defines (#22200) 2023-10-21 21:41:59 +10:00
halconf.h
info.json RGB Matrix: driver naming cleanups (#21594) 2023-08-23 01:00:03 +01:00
mcuconf.h
readme.md
rev_a.c Update ISSI LED types (#22099) 2023-10-04 20:12:50 +11:00
rev_a.h
rules.mk Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353) 2023-06-23 20:31:25 +01:00

readme.md

Perk60 ISO Rev A

  • Keyboard Maintainer: 4pplet
  • Hardware Supported: Perk60 ISO Rev A

Make example for this keyboard (after setting up your build environment):

make 4pplet/perk60_iso/rev_a:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

  • Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
  • Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.