mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-24 17:37:40 +06:00
6e984a8b5e
Microsecond (us) delays are now handled by a busy wait loop according to MCU frequency. This replaces the system counter method which had an overhead of around 12us. TC5 device and supporting routines removed as it was the old us delay counter. wait_ms is now properly a macro to CLK_delay_ms. wait_us is now properly a macro to CLK_delay_us. Removed CLK_get_us as it has no use. All calls to CLK_get_ms() have been replaced by timer_read64() with corrected typing. All calls to CLK_delay_ms() have been replaced by wait_ms(). All calls to CLK_delay_us() have been replaced by wait_us() and timings verified or updated as needed after review on scope. Corrected typing of variables using 64bit ms timer readings if needed.
177 lines
4.8 KiB
C
177 lines
4.8 KiB
C
/*
|
|
Copyright 2018 Massdrop Inc.
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "alt.h"
|
|
|
|
#include "d51_util.h"
|
|
#include "debug.h"
|
|
#include "clks.h"
|
|
#include <string.h>
|
|
|
|
matrix_row_t mlatest[MATRIX_ROWS];
|
|
matrix_row_t mlast[MATRIX_ROWS];
|
|
matrix_row_t mdebounced[MATRIX_ROWS];
|
|
|
|
uint8_t row_ports[] = { MATRIX_ROW_PORTS };
|
|
uint8_t row_pins[] = { MATRIX_ROW_PINS };
|
|
uint8_t col_ports[] = { MATRIX_COL_PORTS };
|
|
uint8_t col_pins[] = { MATRIX_COL_PINS };
|
|
uint32_t row_masks[2]; //NOTE: If more than PA PB used in the future, adjust code to accomodate
|
|
|
|
__attribute__ ((weak))
|
|
void matrix_init_kb(void) {
|
|
matrix_init_user();
|
|
}
|
|
|
|
__attribute__ ((weak))
|
|
void matrix_scan_kb(void) {
|
|
matrix_scan_user();
|
|
}
|
|
|
|
__attribute__ ((weak))
|
|
void matrix_init_user(void) {
|
|
}
|
|
|
|
__attribute__ ((weak))
|
|
void matrix_scan_user(void) {
|
|
}
|
|
|
|
void matrix_init(void)
|
|
{
|
|
memset(mlatest, 0, MATRIX_ROWS * sizeof(matrix_row_t));
|
|
memset(mlast, 0, MATRIX_ROWS * sizeof(matrix_row_t));
|
|
memset(mdebounced, 0, MATRIX_ROWS * sizeof(matrix_row_t));
|
|
|
|
row_masks[PA] = 0;
|
|
row_masks[PB] = 0;
|
|
|
|
uint8_t row;
|
|
for (row = 0; row < MATRIX_ROWS; row++)
|
|
{
|
|
PORT->Group[row_ports[row]].DIRCLR.reg = 1 << row_pins[row]; //Input
|
|
PORT->Group[row_ports[row]].OUTCLR.reg = 1 << row_pins[row]; //Low
|
|
PORT->Group[row_ports[row]].PINCFG[row_pins[row]].bit.INEN = 1; //Input Enable,
|
|
PORT->Group[row_ports[row]].PINCFG[row_pins[row]].bit.PULLEN = 1; //Pull Enable
|
|
row_masks[row_ports[row]] |= 1 << row_pins[row]; //Add pin to proper row mask
|
|
}
|
|
|
|
uint8_t col;
|
|
for (col = 0; col < MATRIX_COLS; col++)
|
|
{
|
|
PORT->Group[col_ports[col]].DIRSET.reg = 1 << col_pins[col]; //Output
|
|
PORT->Group[col_ports[col]].OUTCLR.reg = 1 << col_pins[col]; //Low
|
|
}
|
|
|
|
matrix_init_quantum();
|
|
}
|
|
|
|
uint64_t mdebouncing = 0;
|
|
uint8_t matrix_scan(void)
|
|
{
|
|
uint8_t mchanged;
|
|
uint8_t row;
|
|
uint8_t col;
|
|
uint32_t scans[2]; //PA PB
|
|
|
|
if (timer_read64() < mdebouncing) return 1; //mdebouncing == 0 when no debouncing active
|
|
|
|
memset(mlatest, 0, MATRIX_ROWS * sizeof(matrix_row_t)); //Zero the result buffer
|
|
|
|
for (col = 0; col < MATRIX_COLS; col++)
|
|
{
|
|
PORT->Group[col_ports[col]].OUTSET.reg = 1 << col_pins[col]; //Set col output
|
|
|
|
wait_us(1); //Delay for output
|
|
|
|
scans[PA] = PORT->Group[PA].IN.reg & row_masks[PA]; //Read PA row pins data
|
|
scans[PB] = PORT->Group[PB].IN.reg & row_masks[PB]; //Read PB row pins data
|
|
|
|
PORT->Group[col_ports[col]].OUTCLR.reg = 1 << col_pins[col]; //Clear col output
|
|
|
|
for (row = 0; row < MATRIX_ROWS; row++)
|
|
{
|
|
//Move scan bits from scans array into proper row bit locations
|
|
if (scans[row_ports[row]] & (1 << row_pins[row]))
|
|
mlatest[row] |= 1 << col;
|
|
}
|
|
}
|
|
|
|
mchanged = 0; //Default to no matrix change since last
|
|
|
|
for (row = 0; row < MATRIX_ROWS; row++)
|
|
{
|
|
if (mlast[row] != mlatest[row])
|
|
mchanged = 1;
|
|
mlast[row] = mlatest[row];
|
|
}
|
|
|
|
if (!mchanged)
|
|
{
|
|
for (row = 0; row < MATRIX_ROWS; row++)
|
|
mdebounced[row] = mlatest[row];
|
|
mdebouncing = 0;
|
|
}
|
|
else
|
|
{
|
|
//Begin or extend debounce on change
|
|
mdebouncing = timer_read64() + DEBOUNCING_DELAY;
|
|
}
|
|
|
|
matrix_scan_quantum();
|
|
|
|
return 1;
|
|
}
|
|
|
|
matrix_row_t matrix_get_row(uint8_t row)
|
|
{
|
|
return mdebounced[row];
|
|
}
|
|
|
|
void matrix_print(void)
|
|
{
|
|
char buf[(MATRIX_COLS+8)*(MATRIX_ROWS+1)] = "R C";
|
|
char *pbuf = buf+3;
|
|
uint32_t cols;
|
|
uint32_t rows;
|
|
matrix_row_t row;
|
|
|
|
for (cols = 1; cols <= MATRIX_COLS; cols++)
|
|
{
|
|
*pbuf = (cols%10)+48;
|
|
pbuf++;
|
|
}
|
|
*pbuf = '\r'; pbuf++;
|
|
*pbuf = '\n'; pbuf++;
|
|
|
|
for (rows = 1; rows <= MATRIX_ROWS; rows++)
|
|
{
|
|
row = matrix_get_row(rows-1);
|
|
if (rows < 10) { *pbuf = rows+48; pbuf++; *pbuf = ' '; pbuf++; *pbuf = ' '; pbuf++; }
|
|
else { *pbuf = (rows/10)+48; pbuf++; *pbuf = (rows%10)+48; pbuf++; *pbuf = ' '; pbuf++; }
|
|
for (cols = 0; cols < MATRIX_COLS; cols++)
|
|
{
|
|
if (row & 1 << cols) *pbuf = 'X';
|
|
else *pbuf = '.';
|
|
pbuf++;
|
|
}
|
|
*pbuf = '\r'; pbuf++;
|
|
*pbuf = '\n'; pbuf++;
|
|
}
|
|
*pbuf = 0;
|
|
dprint(buf);
|
|
}
|