mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-27 19:49:01 +06:00
Code Issues Packages Projects Releases Wiki Activity
6ab68e9318
keychron_qmk_firmware/keyboards/ergoslab
History
Ryan 36bc3c867e
Remove redundant UNICODE_ENABLE = no in keyboard-level rules.mk (#14633)
2021-09-30 08:14:21 +10:00
..
keymaps/default
rev1 Make Swap Hands use PROGMEM (#12284) 2021-05-09 23:21:09 -07:00
.noci Initial list of keyboards to exclude from CI (#11213) 2020-12-21 15:38:39 +01:00
config.h
ergoslab.c
ergoslab.h
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
readme.md
rules.mk Remove redundant UNICODE_ENABLE = no in keyboard-level rules.mk (#14633) 2021-09-30 08:14:21 +10:00

readme.md

ergoslab

ergoslab

A split ergo 5x6 keyboard with hotswap sockets and a heap of thumb keys designed by Tom Saleeba. More info on the GitHub Repo.

Status The ergoslab is currently being beta-tested.

  • Keyboard Maintainer: Tom Saleeba
  • Hardware Supported: Pro Micro (ATmega32U4)
  • Hardware Availability: gerbers are available from the releases page on the GitHub repo. Get them manufactured at your favourite PCB house. I used JLCPCB.

Make example for this keyboard (after setting up your build environment):

make ergoslab:default

Example of flashing this keyboard:

make ergoslab:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

A build guide for this keyboard can be found here: Build Guide