mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-30 12:47:37 +06:00
Code Issues Packages Projects Releases Wiki Activity
63af5cd50e
keychron_qmk_firmware/keyboards/mechwild/puckbuddy
History
Ryan 7e0299117b
Move encoder config to data driven (#19923) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-02-26 09:45:12 +11:00
..
keymaps
config.h Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
glcdfont.c
halconf.h
info.json Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
mcuconf.h
puckbuddy.c Remove IS_HOST_LED_ON and migrate usages (#19753) 2023-02-06 02:36:09 +00:00
puckbuddy.h Reallocate SAFE_RANGE (#19909) 2023-02-23 09:49:07 +11:00
readme.md
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

PuckBuddy

PuckBuddy

A macropad with a Cirque Glidepoint Trackpad in the middle, powered by the STM32 Blackpill.

Make example for this keyboard (after setting up your build environment):

make mechwild/puckbuddy:default

Flashing example for this keyboard:

make mechwild/puckbuddy:default:flash

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (assigned to the top left key) and plug in the keyboard while holding it.
  • Physical reset button: Press and hold the boot0 button on the blackpill, tap and release the nrst button on the blackpill, then release the boot0 button.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available. By default this is the top right key on layer 1.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.