mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-30 04:37:14 +06:00

History

Evelien Dekkers f7619600e3 Atom47 led fix (#15272 ) * Define pin states for leds * Enable backlight in rules.mk		2021-12-27 14:20:23 +11:00
..
.noci
config.h	Atom47 led fix (#15272 )	2021-12-27 14:20:23 +11:00
info.json	Remove width, height and key_count from info.json (#14274 )	2021-09-12 14:04:56 +10:00
readme.md
rev2.c	[Keyboard] Refactor atom47 and add rev4 and rev5 (#13201 )	2021-08-19 09:40:28 -07:00
rev2.h	[Keyboard] Refactor atom47 and add rev4 and rev5 (#13201 )	2021-08-19 09:40:28 -07:00
rules.mk	Atom47 led fix (#15272 )	2021-12-27 14:20:23 +11:00

readme.md

Atom47 rev2

This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has modified his and put a big spacebar in it.

Support

Keyboard Maintainer: Matthew Kerfoot
Hardware Supported: Atom47 rev2
Hardware Availability: None

Features

QMK Firmware
In-switch leds
Through-hole micro usb connector (less likely to break off!)
Easily reachable reset button under the spacebar
In-switch CapsLock indicator

Build

To build the default keymap, simply run make atom47/rev2:default.

For an alternative, heavily modified layout you would just need to run make atom47/rev2:LEdiodes.

See build environment setup then the make instructions for more information.