mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-26 19:18:03 +06:00
e72562fe6f
* Initial commit of oddball keyboard * Update oddball project url * Update pointer functions to only run on master side * Add unique product version * Capitalise product name * Convert oddball keymap layer flags to enum * Remove commented keyboard boilerplate code * Remove unused keymap config * Fix incorrect layout in info.json * Add markdown link text in readme
271 lines
7.5 KiB
C
271 lines
7.5 KiB
C
#include <avr/io.h>
|
|
#include <avr/interrupt.h>
|
|
#include "quantum.h"
|
|
#include "pointing_device.h"
|
|
#include "adns9800_srom_A4.h"
|
|
#include "../../lib/lufa/LUFA/Drivers/Peripheral/SPI.h"
|
|
|
|
// registers
|
|
#define REG_Product_ID 0x00
|
|
#define REG_Revision_ID 0x01
|
|
#define REG_Motion 0x02
|
|
#define REG_Delta_X_L 0x03
|
|
#define REG_Delta_X_H 0x04
|
|
#define REG_Delta_Y_L 0x05
|
|
#define REG_Delta_Y_H 0x06
|
|
#define REG_SQUAL 0x07
|
|
#define REG_Pixel_Sum 0x08
|
|
#define REG_Maximum_Pixel 0x09
|
|
#define REG_Minimum_Pixel 0x0a
|
|
#define REG_Shutter_Lower 0x0b
|
|
#define REG_Shutter_Upper 0x0c
|
|
#define REG_Frame_Period_Lower 0x0d
|
|
#define REG_Frame_Period_Upper 0x0e
|
|
#define REG_Configuration_I 0x0f
|
|
#define REG_Configuration_II 0x10
|
|
#define REG_Frame_Capture 0x12
|
|
#define REG_SROM_Enable 0x13
|
|
#define REG_Run_Downshift 0x14
|
|
#define REG_Rest1_Rate 0x15
|
|
#define REG_Rest1_Downshift 0x16
|
|
#define REG_Rest2_Rate 0x17
|
|
#define REG_Rest2_Downshift 0x18
|
|
#define REG_Rest3_Rate 0x19
|
|
#define REG_Frame_Period_Max_Bound_Lower 0x1a
|
|
#define REG_Frame_Period_Max_Bound_Upper 0x1b
|
|
#define REG_Frame_Period_Min_Bound_Lower 0x1c
|
|
#define REG_Frame_Period_Min_Bound_Upper 0x1d
|
|
#define REG_Shutter_Max_Bound_Lower 0x1e
|
|
#define REG_Shutter_Max_Bound_Upper 0x1f
|
|
#define REG_LASER_CTRL0 0x20
|
|
#define REG_Observation 0x24
|
|
#define REG_Data_Out_Lower 0x25
|
|
#define REG_Data_Out_Upper 0x26
|
|
#define REG_SROM_ID 0x2a
|
|
#define REG_Lift_Detection_Thr 0x2e
|
|
#define REG_Configuration_V 0x2f
|
|
#define REG_Configuration_IV 0x39
|
|
#define REG_Power_Up_Reset 0x3a
|
|
#define REG_Shutdown 0x3b
|
|
#define REG_Inverse_Product_ID 0x3f
|
|
#define REG_Motion_Burst 0x50
|
|
#define REG_SROM_Load_Burst 0x62
|
|
#define REG_Pixel_Burst 0x64
|
|
|
|
// pins
|
|
#define NCS 0
|
|
|
|
extern const uint16_t firmware_length;
|
|
extern const uint8_t firmware_data[];
|
|
|
|
enum motion_burst_property{
|
|
motion = 0,
|
|
observation,
|
|
delta_x_l,
|
|
delta_x_h,
|
|
delta_y_l,
|
|
delta_y_h,
|
|
squal,
|
|
pixel_sum,
|
|
maximum_pixel,
|
|
minimum_pixel,
|
|
shutter_upper,
|
|
shutter_lower,
|
|
frame_period_upper,
|
|
frame_period_lower,
|
|
end_data
|
|
};
|
|
|
|
// used to track the motion delta between updates
|
|
volatile int32_t delta_x;
|
|
volatile int32_t delta_y;
|
|
|
|
void adns_begin(void){
|
|
PORTB &= ~ (1 << NCS);
|
|
}
|
|
|
|
void adns_end(void){
|
|
PORTB |= (1 << NCS);
|
|
}
|
|
|
|
void adns_write(uint8_t reg_addr, uint8_t data){
|
|
|
|
adns_begin();
|
|
|
|
//send address of the register, with MSBit = 1 to indicate it's a write
|
|
SPI_TransferByte(reg_addr | 0x80 );
|
|
SPI_TransferByte(data);
|
|
|
|
// tSCLK-NCS for write operation
|
|
wait_us(20);
|
|
|
|
adns_end();
|
|
|
|
// tSWW/tSWR (=120us) minus tSCLK-NCS. Could be shortened, but is looks like a safe lower bound
|
|
wait_us(100);
|
|
}
|
|
|
|
uint8_t adns_read(uint8_t reg_addr){
|
|
|
|
adns_begin();
|
|
|
|
// send adress of the register, with MSBit = 0 to indicate it's a read
|
|
SPI_TransferByte(reg_addr & 0x7f );
|
|
uint8_t data = SPI_TransferByte(0);
|
|
|
|
// tSCLK-NCS for read operation is 120ns
|
|
wait_us(1);
|
|
|
|
adns_end();
|
|
|
|
// tSRW/tSRR (=20us) minus tSCLK-NCS
|
|
wait_us(19);
|
|
|
|
return data;
|
|
}
|
|
|
|
void pointing_device_init(void) {
|
|
|
|
if(!is_keyboard_master())
|
|
return;
|
|
|
|
// interrupt 2
|
|
EICRA &= ~(1 << 4);
|
|
EICRA |= (1 << 5);
|
|
EIMSK |= (1<<INT2);
|
|
|
|
// mode 3
|
|
SPI_Init(
|
|
SPI_SPEED_FCPU_DIV_8 |
|
|
SPI_ORDER_MSB_FIRST |
|
|
SPI_SCK_LEAD_FALLING |
|
|
SPI_SAMPLE_TRAILING |
|
|
SPI_MODE_MASTER);
|
|
|
|
// set B0 output
|
|
DDRB |= (1 << 0);
|
|
|
|
// reset serial port
|
|
adns_end();
|
|
adns_begin();
|
|
adns_end();
|
|
|
|
// reboot
|
|
adns_write(REG_Power_Up_Reset, 0x5a);
|
|
wait_ms(50);
|
|
|
|
// read registers and discard
|
|
adns_read(REG_Motion);
|
|
adns_read(REG_Delta_X_L);
|
|
adns_read(REG_Delta_X_H);
|
|
adns_read(REG_Delta_Y_L);
|
|
adns_read(REG_Delta_Y_H);
|
|
|
|
// upload firmware
|
|
|
|
// set the configuration_IV register in 3k firmware mode
|
|
// bit 1 = 1 for 3k mode, other bits are reserved
|
|
adns_write(REG_Configuration_IV, 0x02);
|
|
|
|
// write 0x1d in SROM_enable reg for initializing
|
|
adns_write(REG_SROM_Enable, 0x1d);
|
|
|
|
// wait for more than one frame period
|
|
// assume that the frame rate is as low as 100fps... even if it should never be that low
|
|
wait_ms(10);
|
|
|
|
// write 0x18 to SROM_enable to start SROM download
|
|
adns_write(REG_SROM_Enable, 0x18);
|
|
|
|
// write the SROM file (=firmware data)
|
|
adns_begin();
|
|
|
|
// write burst destination adress
|
|
SPI_TransferByte(REG_SROM_Load_Burst | 0x80);
|
|
wait_us(15);
|
|
|
|
// send all bytes of the firmware
|
|
unsigned char c;
|
|
for(int i = 0; i < firmware_length; i++){
|
|
c = (unsigned char)pgm_read_byte(firmware_data + i);
|
|
SPI_TransferByte(c);
|
|
wait_us(15);
|
|
}
|
|
|
|
adns_end();
|
|
|
|
wait_ms(10);
|
|
|
|
// enable laser(bit 0 = 0b), in normal mode (bits 3,2,1 = 000b)
|
|
// reading the actual value of the register is important because the real
|
|
// default value is different from what is said in the datasheet, and if you
|
|
// change the reserved bytes (like by writing 0x00...) it would not work.
|
|
uint8_t laser_ctrl0 = adns_read(REG_LASER_CTRL0);
|
|
adns_write(REG_LASER_CTRL0, laser_ctrl0 & 0xf0);
|
|
|
|
wait_ms(1);
|
|
|
|
// set the configuration_I register to set the CPI
|
|
// 0x01 = 50, minimum
|
|
// 0x44 = 3400, default
|
|
// 0x8e = 7100
|
|
// 0xA4 = 8200, maximum
|
|
adns_write(REG_Configuration_I, 0x04);
|
|
|
|
wait_ms(100);
|
|
}
|
|
|
|
void pointing_device_task(void) {
|
|
|
|
if(!is_keyboard_master())
|
|
return;
|
|
|
|
report_mouse_t report = pointing_device_get_report();
|
|
|
|
// clamp deltas from -127 to 127
|
|
report.x = delta_x < -127 ? 127 : delta_x > 127 ? 127 : delta_x;
|
|
report.x = -report.x;
|
|
|
|
report.y = delta_y < -127 ? 127 : delta_y > 127 ? 127 : delta_y;
|
|
|
|
// reset deltas
|
|
delta_x = 0;
|
|
delta_y = 0;
|
|
|
|
pointing_device_set_report(report);
|
|
pointing_device_send();
|
|
}
|
|
|
|
int16_t convertDeltaToInt(uint8_t high, uint8_t low){
|
|
|
|
// join bytes into twos compliment
|
|
uint16_t twos_comp = (high << 8) | low;
|
|
|
|
// convert twos comp to int
|
|
if (twos_comp & 0x8000)
|
|
return -1 * ((twos_comp ^ 0xffff) + 1);
|
|
|
|
return twos_comp;
|
|
}
|
|
|
|
ISR(INT2_vect) {
|
|
// called on interrupt 2 when sensed motion
|
|
// copy burst data from the respective registers
|
|
|
|
adns_begin();
|
|
|
|
// send adress of the register, with MSBit = 1 to indicate it's a write
|
|
SPI_TransferByte(REG_Motion_Burst & 0x7f);
|
|
|
|
uint8_t burst_data[pixel_sum];
|
|
|
|
for (int i = 0; i < pixel_sum; ++i) {
|
|
burst_data[i] = SPI_TransferByte(0);
|
|
}
|
|
|
|
delta_x += convertDeltaToInt(burst_data[delta_x_h], burst_data[delta_x_l]);
|
|
delta_y += convertDeltaToInt(burst_data[delta_y_h], burst_data[delta_y_l]);
|
|
|
|
adns_end();
|
|
}
|