mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-25 10:44:59 +06:00
Code Issues Packages Projects Releases Wiki Activity
56555c61e1
keychron_qmk_firmware/keyboards/kineticlabs/emu/soldered
History
Ryan 56555c61e1
Migrate LAYOUTS to data driven (#19541) 
* Migrate `LAYOUTS` to data driven, 0-9

* Migrate `LAYOUTS` to data driven, A

* Migrate `LAYOUTS` to data driven, B

* Migrate `LAYOUTS` to data driven, C

* Migrate `LAYOUTS` to data driven, D

* Migrate `LAYOUTS` to data driven, E

* Migrate `LAYOUTS` to data driven, F

* Migrate `LAYOUTS` to data driven, G

* Migrate `LAYOUTS` to data driven, H

* Migrate `LAYOUTS` to data driven, handwired

* Migrate `LAYOUTS` to data driven, I

* Migrate `LAYOUTS` to data driven, J

* Migrate `LAYOUTS` to data driven, K

* Migrate `LAYOUTS` to data driven, L

* Migrate `LAYOUTS` to data driven, M

* Migrate `LAYOUTS` to data driven, N

* Migrate `LAYOUTS` to data driven, O

* Migrate `LAYOUTS` to data driven, P

* Migrate `LAYOUTS` to data driven, Q

* Migrate `LAYOUTS` to data driven, R

* Migrate `LAYOUTS` to data driven, S

* Migrate `LAYOUTS` to data driven, T

* Migrate `LAYOUTS` to data driven, U

* Migrate `LAYOUTS` to data driven, V

* Migrate `LAYOUTS` to data driven, W

* Migrate `LAYOUTS` to data driven, X

* Migrate `LAYOUTS` to data driven, Y

* Migrate `LAYOUTS` to data driven, Z
2023-01-10 02:48:20 +00:00
..
keymaps
config.h
info.json Migrate LAYOUTS to data driven (#19541) 2023-01-10 02:48:20 +00:00
readme.md
rules.mk Migrate LAYOUTS to data driven (#19541) 2023-01-10 02:48:20 +00:00
soldered.c
soldered.h

readme.md

Emu Hotswap

emu

TKL keyboard made by KineticLabs

  • Keyboard Maintainer: kb-elmo
  • Hardware Supported: Emu hotswap PCB
  • Hardware Availability: Groupbuy

Make example for this keyboard (after setting up your build environment):

make kineticlabs/emu_hotswap:default

Flashing example for this keyboard:

make kineticlabs/emu_hotswap:default:flash

Bootloader: Press the physical reset button on the bottom side of the PCB (labeled SW1) or hold down ESC while plugging in the board.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.