mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-22 08:27:56 +06:00
Code Issues Packages Projects Releases Wiki Activity
56323f75c6
keychron_qmk_firmware/keyboards/citrus/erdnuss65
History
James Young 079ac7c166
Migrate LOCKING_*_ENABLE to Data-Driven: A-C, Part 2 (#23746) 
Affects:

  - `chalice`
  - `charue/sunsetter_r2`
  - `checkerboards/axon40`
  - `checkerboards/candybar_ortho`
  - `checkerboards/g_idb60`
  - `checkerboards/nop60`
  - `checkerboards/phoenix45_ortho`
  - `checkerboards/plexus75`
  - `checkerboards/plexus75_he`
  - `checkerboards/pursuit40`
  - `checkerboards/quark`
  - `checkerboards/quark_lp`
  - `checkerboards/quark_plus`
  - `checkerboards/quark_squared`
  - `checkerboards/snop60`
  - `checkerboards/ud40_ortho_alt`
  - `cheshire/curiosity`
  - `chickenman/ciel`
  - `chlx/merro60`
  - `chlx/str_merro60`
  - `chosfox/cf81`
  - `citrus/erdnuss65`
  - `ckeys/handwire_101`
  - `ckeys/nakey`
  - `ckeys/obelus`
  - `ckeys/thedora`
  - `ckeys/washington`
  - `clueboard/2x1800/2018`
  - `clueboard/2x1800/2021`
2024-05-20 21:00:35 +01:00
..
keymaps Adjust keycode alignment around QK_BOOT (#23697) 2024-05-11 16:50:48 +01:00
config.h Migrate LOCKING_*_ENABLE to Data-Driven: A-C, Part 2 (#23746) 2024-05-20 21:00:35 +01:00
erdnuss65.c
keyboard.json Migrate LOCKING_*_ENABLE to Data-Driven: A-C, Part 2 (#23746) 2024-05-20 21:00:35 +01:00
readme.md

readme.md

Erdnuss65

  • Keyboard Maintainer: Citrus Lab
  • Hardware Supported: STM32F103C8T6

Make example for this keyboard (after setting up your build environment):

make citrus/erdnuss65:default

Flashing example for this keyboard:

make citrus/erdnuss65:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available