mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-12 05:06:38 +06:00
…
|
||
---|---|---|
.. | ||
keymaps | ||
info.json | ||
readme.md | ||
rules.mk |
EnvKB 60F
A low cost Standard 60% Design which takes inspiration from the CFTKB Mysterium.
- Keyboard Maintainer: Envious-Data
- Hardware Supported: EnvKB 60F (Pi Pico)
- Hardware Availability: GitHub
Make example for this keyboard (after setting up your build environment):
make enviousdesign/60f:default
Flashing example for this keyboard:
make enviousdesign/60f:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
- Physical reset: Hold down the
BOOTSEL
button on the Pi Pico, then either plug the board in or press theRESET
button. - Keycode in layout: Press the key mapped to
QK_BOOT
. In the pre-supplied keymaps it is on the second layer, replacing the Tab key.
After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named RPI-RP2
. If the CLI is unable to find this device, the compiled .uf2
file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.