mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-26 11:08:52 +06:00
| .. | ||
| keymaps | ||
| rev1 | ||
| config.h | ||
| info.json | ||
| matrix.c | ||
| readme.md | ||
| rules.mk | ||
| serial.c | ||
| serial.h | ||
| split_rgb.c | ||
| split_rgb.h | ||
| split_util.c | ||
| split_util.h | ||
| zen.c | ||
| zen.h | ||
Zen Keyboard
A split ergo keyboard with a few goals in mind:
- Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen is only 8.0mm thick.
- Layout designed for gaming. 1.5u pinky keys, ortho alphas, and angled thumb keys. After trying Ortholinear, Atreus62, and Ergodox, this is the best layout for gaming and typing.
- RGB backlighting. 16 WS2812b LEDs shine through the perimeter switches. The SK6812 variant are cheap and easy to solder.
- Price. Using Arduino Pro Micro, SK6812 LEDs, and PCB FR4 for the case, the cost of each half without switches or caps can be reduced to under $20 when purchased at volume.
Keyboard Maintainer: Legonut
Hardware Supported: Zen rev1
Hardware Availability: RGBKB.net
A build guide and more info for this keyboard can be found here: Zen Build Guide.
Make example for this keyboard (after setting up your build environment):
make zen/rev1:default
See build environment setup then the make instructions for more information.