mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-27 19:16:40 +06:00
276 lines
9.5 KiB
C
276 lines
9.5 KiB
C
/*
|
|
Copyright 2013 Oleg Kostyuk <cub.uanic@gmail.com>
|
|
2020 Pierre Chevalier <pierrechevalier83@gmail.com>
|
|
2021 weteor
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*
|
|
* This code was heavily inspired by the ergodox_ez keymap, and modernized
|
|
* to take advantage of the quantum.h microcontroller agnostics gpio control
|
|
* abstractions and use the macros defined in config.h for the wiring as opposed
|
|
* to repeating that information all over the place.
|
|
*/
|
|
|
|
#include QMK_KEYBOARD_H
|
|
#include "i2c_master.h"
|
|
|
|
extern i2c_status_t tca9555_status;
|
|
#define I2C_TIMEOUT 1000
|
|
|
|
// I2C address:
|
|
// All address pins of the tca9555 are connected to the ground
|
|
// | 0 | 1 | 0 | 0 | A2 | A1 | A0 |
|
|
// | 0 | 1 | 0 | 0 | 0 | 0 | 0 |
|
|
#define I2C_ADDR 0b0100000
|
|
#define I2C_ADDR_WRITE ((I2C_ADDR << 1) | I2C_WRITE)
|
|
#define I2C_ADDR_READ ((I2C_ADDR << 1) | I2C_READ)
|
|
|
|
// Register addresses
|
|
#define IODIRA 0x06 // i/o direction register
|
|
#define IODIRB 0x07
|
|
#define IREGP0 0x00 // GPIO pull-up resistor register
|
|
#define IREGP1 0x01
|
|
#define OREGP0 0x02 // general purpose i/o port register (write modifies OLAT)
|
|
#define OREGP1 0x03
|
|
|
|
bool i2c_initialized = 0;
|
|
i2c_status_t tca9555_status = I2C_ADDR;
|
|
|
|
uint8_t init_tca9555(void) {
|
|
print("starting init");
|
|
tca9555_status = I2C_ADDR;
|
|
|
|
// I2C subsystem
|
|
if (i2c_initialized == 0) {
|
|
i2c_init(); // on pins D(1,0)
|
|
i2c_initialized = true;
|
|
wait_ms(I2C_TIMEOUT);
|
|
}
|
|
|
|
// set pin direction
|
|
// - unused : input : 1
|
|
// - input : input : 1
|
|
// - driving : output : 0
|
|
tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
|
|
if (tca9555_status) goto out;
|
|
tca9555_status = i2c_write(IODIRA, I2C_TIMEOUT);
|
|
if (tca9555_status) goto out;
|
|
// This means: read all pins of port 0
|
|
tca9555_status = i2c_write(0b11111111, I2C_TIMEOUT);
|
|
if (tca9555_status) goto out;
|
|
// This means: we will write on pins 0 to 3 on port 1. read rest
|
|
tca9555_status = i2c_write(0b11110000, I2C_TIMEOUT);
|
|
if (tca9555_status) goto out;
|
|
|
|
out:
|
|
i2c_stop();
|
|
return tca9555_status;
|
|
}
|
|
|
|
/* matrix state(1:on, 0:off) */
|
|
static matrix_row_t matrix[MATRIX_ROWS]; // debounced values
|
|
|
|
static matrix_row_t read_cols(uint8_t row);
|
|
static void init_cols(void);
|
|
static void unselect_rows(void);
|
|
static void select_row(uint8_t row);
|
|
|
|
static uint8_t tca9555_reset_loop;
|
|
|
|
void matrix_init_custom(void) {
|
|
// initialize row and col
|
|
|
|
tca9555_status = init_tca9555();
|
|
|
|
unselect_rows();
|
|
init_cols();
|
|
|
|
// initialize matrix state: all keys off
|
|
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
|
matrix[i] = 0;
|
|
}
|
|
}
|
|
|
|
void matrix_power_up(void) {
|
|
tca9555_status = init_tca9555();
|
|
|
|
unselect_rows();
|
|
init_cols();
|
|
|
|
// initialize matrix state: all keys off
|
|
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
|
matrix[i] = 0;
|
|
}
|
|
}
|
|
|
|
// Reads and stores a row, returning
|
|
// whether a change occurred.
|
|
static inline bool store_matrix_row(matrix_row_t current_matrix[], uint8_t index) {
|
|
matrix_row_t temp = read_cols(index);
|
|
if (current_matrix[index] != temp) {
|
|
current_matrix[index] = temp;
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool matrix_scan_custom(matrix_row_t current_matrix[]) {
|
|
if (tca9555_status) { // if there was an error
|
|
if (++tca9555_reset_loop == 0) {
|
|
// since tca9555_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
|
|
// this will be approx bit more frequent than once per second
|
|
dprint("trying to reset tca9555\n");
|
|
tca9555_status = init_tca9555();
|
|
if (tca9555_status) {
|
|
dprint("right side not responding\n");
|
|
} else {
|
|
dprint("right side attached\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
bool changed = false;
|
|
for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
|
|
// select rows from left and right hands
|
|
uint8_t left_index = i;
|
|
uint8_t right_index = i + MATRIX_ROWS_PER_SIDE;
|
|
select_row(left_index);
|
|
select_row(right_index);
|
|
|
|
// we don't need a 30us delay anymore, because selecting a
|
|
// left-hand row requires more than 30us for i2c.
|
|
|
|
changed |= store_matrix_row(current_matrix, left_index);
|
|
changed |= store_matrix_row(current_matrix, right_index);
|
|
|
|
unselect_rows();
|
|
}
|
|
|
|
return changed;
|
|
}
|
|
|
|
static void init_cols(void) {
|
|
// init on tca9555
|
|
// not needed, already done as part of init_tca9555()
|
|
|
|
// init on mcu
|
|
pin_t matrix_col_pins_mcu[MATRIX_COLS_PER_SIDE] = MATRIX_COL_PINS_L;
|
|
for (int pin_index = 0; pin_index < MATRIX_COLS_PER_SIDE; pin_index++) {
|
|
pin_t pin = matrix_col_pins_mcu[pin_index];
|
|
setPinInput(pin);
|
|
writePinHigh(pin);
|
|
}
|
|
}
|
|
|
|
static matrix_row_t read_cols(uint8_t row) {
|
|
if (row < MATRIX_ROWS_PER_SIDE) {
|
|
pin_t matrix_col_pins_mcu[MATRIX_COLS_PER_SIDE] = MATRIX_COL_PINS_L;
|
|
matrix_row_t current_row_value = 0;
|
|
// For each col...
|
|
for (uint8_t col_index = 0; col_index < MATRIX_COLS_PER_SIDE; col_index++) {
|
|
// Select the col pin to read (active low)
|
|
uint8_t pin_state = readPin(matrix_col_pins_mcu[col_index]);
|
|
|
|
// Populate the matrix row with the state of the col pin
|
|
current_row_value |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index);
|
|
}
|
|
return current_row_value;
|
|
} else {
|
|
if (tca9555_status) { // if there was an error
|
|
return 0;
|
|
} else {
|
|
uint8_t data = 0;
|
|
uint8_t port0 = 0;
|
|
tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
|
|
if (tca9555_status) goto out;
|
|
tca9555_status = i2c_write(IREGP0, I2C_TIMEOUT);
|
|
if (tca9555_status) goto out;
|
|
tca9555_status = i2c_start(I2C_ADDR_READ, I2C_TIMEOUT);
|
|
if (tca9555_status) goto out;
|
|
tca9555_status = i2c_read_nack(I2C_TIMEOUT);
|
|
if (tca9555_status < 0) goto out;
|
|
|
|
port0 = ~(uint8_t)tca9555_status;
|
|
|
|
// We read all the pins on GPIOA.
|
|
// The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero.
|
|
// The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys.
|
|
// the pins connected to eact columns are sequential, but in reverse order, and counting from zero down (col 5 -> GPIO04, col6 -> GPIO03 and so on).
|
|
data |= ( port0 & 0x01 ) << 4;
|
|
data |= ( port0 & 0x02 ) << 2;
|
|
data |= ( port0 & 0x04 );
|
|
data |= ( port0 & 0x08 ) >> 2;
|
|
data |= ( port0 & 0x10 ) >> 4;
|
|
|
|
tca9555_status = I2C_STATUS_SUCCESS;
|
|
out:
|
|
i2c_stop();
|
|
|
|
return data;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void unselect_rows(void) {
|
|
// no need to unselect on tca9555, because the select step sets all
|
|
// the other row bits high, and it's not changing to a different
|
|
// direction
|
|
|
|
// unselect rows on microcontroller
|
|
pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_L;
|
|
for (int pin_index = 0; pin_index < MATRIX_ROWS_PER_SIDE; pin_index++) {
|
|
pin_t pin = matrix_row_pins_mcu[pin_index];
|
|
setPinInput(pin);
|
|
writePinLow(pin);
|
|
}
|
|
}
|
|
|
|
static void select_row(uint8_t row) {
|
|
uint8_t port1 = 0xff;
|
|
|
|
if (row < MATRIX_ROWS_PER_SIDE) {
|
|
// select on atmega32u4
|
|
pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_L;
|
|
pin_t pin = matrix_row_pins_mcu[row];
|
|
setPinOutput(pin);
|
|
writePinLow(pin);
|
|
} else {
|
|
// select on tca9555
|
|
if (tca9555_status) { // if there was an error
|
|
// do nothing
|
|
} else {
|
|
switch(row) {
|
|
case 4: port1 &= ~(1 << 0); break;
|
|
case 5: port1 &= ~(1 << 1); break;
|
|
case 6: port1 &= ~(1 << 2); break;
|
|
case 7: port1 &= ~(1 << 3); break;
|
|
default: break;
|
|
}
|
|
|
|
// Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one.
|
|
// Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus.
|
|
tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT);
|
|
if (tca9555_status) goto out;
|
|
tca9555_status = i2c_write(OREGP1, I2C_TIMEOUT);
|
|
if (tca9555_status) goto out;
|
|
tca9555_status = i2c_write(port1, I2C_TIMEOUT);
|
|
if (tca9555_status) goto out;
|
|
out:
|
|
i2c_stop();
|
|
}
|
|
}
|
|
}
|