mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-25 09:56:54 +06:00
Code Issues Packages Projects Releases Wiki Activity
2fb9816c77
keychron_qmk_firmware/keyboards/primekb/meridian
History
James Young c4e182b98e
Migrate LOCKING_*_ENABLE to Data-Driven: P, Part 2 (#23780) 
Affects:

  - `preonic/rev1`
  - `preonic/rev2`
  - `preonic/rev3`
  - `preonic/rev3_drop`
  - `primekb/meridian/ktr1010`
  - `primekb/meridian/ws2812`
  - `primekb/meridian_rgb`
  - `primekb/prime_m`
  - `primekb/prime_o`
  - `primekb/prime_r`
  - `projectcain/relic`
  - `projectcain/vault45`
  - `projectd/65/projectd_65_ansi`
  - `projectd/75/ansi`
  - `projectkb/alice/rev1`
  - `projectkb/alice/rev2`
  - `projectkb/signature65`
  - `projectkb/signature87`
  - `prototypist/allison`
  - `prototypist/allison_numpad`
  - `prototypist/j01`
  - `psuieee/pluto12`
  - `pteron36`
  - `puck`
  - `punk75`
2024-05-23 19:49:53 +01:00
..
keymaps Adjust keycode alignment around QK_BOOT (#23697) 2024-05-11 16:50:48 +01:00
ktr1010 Migrate LOCKING_*_ENABLE to Data-Driven: P, Part 2 (#23780) 2024-05-23 19:49:53 +01:00
ws2812 Migrate LOCKING_*_ENABLE to Data-Driven: P, Part 2 (#23780) 2024-05-23 19:49:53 +01:00
chconf.h
config.h Migrate LOCKING_*_ENABLE to Data-Driven: P, Part 2 (#23780) 2024-05-23 19:49:53 +01:00
halconf.h
info.json Migrate LOCKING_*_ENABLE to Data-Driven: P, Part 2 (#23780) 2024-05-23 19:49:53 +01:00
mcuconf.h
meridian.c Update GPIO API usage in keyboard code (#23361) 2024-05-03 15:21:29 +10:00
readme.md
rules.mk Migrate features and LTO from rules.mk to data driven (#23307) 2024-03-30 10:57:30 +00:00

readme.md

ai03 x PrimeKB Meridian

Meridian

Compiling firmware and flashing

Enter bootloader

The DFU state in the bootloader can be accessed in 3 ways:

  • Bootmagic reset: hold down the key at (0,0) in the matrix (usually Escape) and plug in the keyboard; or
  • Physical reset button: press the button on the bottom of the PCB; or
  • Keycode in layout: press the key mapped to QK_BOOT if it is available (Escape key on layer 1 in the default layout).

Compile firmware

The Meridian PCB was delivered in two variants, equal in design but using different RGB LED models: one using WS2812 and another using KTR1010 LEDs. Both can be compiled using

make primekb/meridian/ws1812:default
make primekb/meridian/ktr1010:default

After compiling, enter bootloader in the PCB and flash the firmware using dfu-util or QMK Toolbox. For direct compile-and-flashing, put the PCB in DFU state and use

make primekb/meridian/ws1812:default:flash
make primekb/meridian/ktr1010:default:flash

VIA-supported firmwares are also available.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.