mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-24 18:25:01 +06:00
637 lines
17 KiB
Makefile
637 lines
17 KiB
Makefile
# Hey Emacs, this is a -*- makefile -*-
|
|
#----------------------------------------------------------------------------
|
|
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
|
|
#
|
|
# Released to the Public Domain
|
|
#
|
|
# Additional material for this makefile was written by:
|
|
# Peter Fleury
|
|
# Tim Henigan
|
|
# Colin O'Flynn
|
|
# Reiner Patommel
|
|
# Markus Pfaff
|
|
# Sander Pool
|
|
# Frederik Rouleau
|
|
# Carlos Lamas
|
|
#
|
|
#----------------------------------------------------------------------------
|
|
# On command line:
|
|
#
|
|
# make all = Make software.
|
|
#
|
|
# make clean = Clean out built project files.
|
|
#
|
|
# make coff = Convert ELF to AVR COFF.
|
|
#
|
|
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
#
|
|
# make program = Download the hex file to the device, using avrdude.
|
|
# Please customize the avrdude settings below first!
|
|
#
|
|
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
# with avr-gdb or avr-insight as the front end for debugging.
|
|
#
|
|
# make filename.s = Just compile filename.c into the assembler code only.
|
|
#
|
|
# make filename.i = Create a preprocessed source file for use in submitting
|
|
# bug reports to the GCC project.
|
|
#
|
|
# To rebuild project do "make clean" then "make all".
|
|
#----------------------------------------------------------------------------
|
|
|
|
# Following variables need to be set in <target>/Makefile:
|
|
# TARGET
|
|
# COMMON_DIR
|
|
# TARGET_DIR
|
|
# TARGET_SRC
|
|
# MCU
|
|
# F_CPU
|
|
|
|
|
|
# List C source files here. (C dependencies are automatically generated.)
|
|
SRC = tmk.c \
|
|
key_process.c \
|
|
usb_keyboard.c \
|
|
usb_mouse.c \
|
|
usb_debug.c \
|
|
usb.c \
|
|
jump_bootloader.c \
|
|
print.c \
|
|
util.c
|
|
SRC += $(TARGET_SRC)
|
|
|
|
# C source file search path
|
|
VPATH = $(TARGET_DIR):$(COMMON_DIR)
|
|
|
|
|
|
# Output format. (can be srec, ihex, binary)
|
|
FORMAT = ihex
|
|
|
|
|
|
# Object files directory
|
|
# To put object files in current directory, use a dot (.), do NOT make
|
|
# this an empty or blank macro!
|
|
OBJDIR = .
|
|
|
|
|
|
# List C++ source files here. (C dependencies are automatically generated.)
|
|
CPPSRC =
|
|
|
|
|
|
# List Assembler source files here.
|
|
# Make them always end in a capital .S. Files ending in a lowercase .s
|
|
# will not be considered source files but generated files (assembler
|
|
# output from the compiler), and will be deleted upon "make clean"!
|
|
# Even though the DOS/Win* filesystem matches both .s and .S the same,
|
|
# it will preserve the spelling of the filenames, and gcc itself does
|
|
# care about how the name is spelled on its command-line.
|
|
ASRC =
|
|
|
|
|
|
# Optimization level, can be [0, 1, 2, 3, s].
|
|
# 0 = turn off optimization. s = optimize for size.
|
|
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
|
|
OPT = s
|
|
|
|
|
|
# Debugging format.
|
|
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
|
|
# AVR Studio 4.10 requires dwarf-2.
|
|
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
|
|
DEBUG = dwarf-2
|
|
|
|
|
|
# List any extra directories to look for include files here.
|
|
# Each directory must be seperated by a space.
|
|
# Use forward slashes for directory separators.
|
|
# For a directory that has spaces, enclose it in quotes.
|
|
EXTRAINCDIRS = $(TARGET_DIR) $(COMMON_DIR)
|
|
|
|
|
|
# Compiler flag to set the C Standard level.
|
|
# c89 = "ANSI" C
|
|
# gnu89 = c89 plus GCC extensions
|
|
# c99 = ISO C99 standard (not yet fully implemented)
|
|
# gnu99 = c99 plus GCC extensions
|
|
CSTANDARD = -std=gnu99
|
|
|
|
|
|
# Place -D or -U options here for C sources
|
|
CDEFS = -DF_CPU=$(F_CPU)UL
|
|
CDEFS += -DDESCRIPTION=$(DESCRIPTION)
|
|
CDEFS += -DVENDOR_ID=$(VENDOR_ID)
|
|
CDEFS += -DPRODUCT_ID=$(PRODUCT_ID)
|
|
CDEFS += -DMANUFACTURER=$(MANUFACTURER)
|
|
CDEFS += -DPRODUCT=$(PRODUCT)
|
|
ifdef MOUSE_DELAY_TIME
|
|
CDEFS += -DMOUSE_DELAY_TIME=$(MOUSE_DELAY_TIME)
|
|
endif
|
|
|
|
|
|
# Place -D or -U options here for ASM sources
|
|
ADEFS = -DF_CPU=$(F_CPU)
|
|
ADEFS += -DDESCRIPTION=$(DESCRIPTION)
|
|
ADEFS += -DVENDOR_ID=$(VENDOR_ID)
|
|
ADEFS += -DPRODUCT_ID=$(PRODUCT_ID)
|
|
ADEFS += -DMANUFACTURER=$(MANUFACTURER)
|
|
ADEFS += -DPRODUCT=$(PRODUCT)
|
|
ifdef MOUSE_DELAY_TIME
|
|
ADEFS += -DMOUSE_DELAY_TIME=$(MOUSE_DELAY_TIME)
|
|
endif
|
|
|
|
|
|
# Place -D or -U options here for C++ sources
|
|
CPPDEFS = -DF_CPU=$(F_CPU)UL -DDESCRIPTION=$(DESCRIPTION) -DVENDOR_ID=$(VENDOR_ID) -DPRODUCT_ID=$(PRODUCT_ID)
|
|
#CPPDEFS += -D__STDC_LIMIT_MACROS
|
|
#CPPDEFS += -D__STDC_CONSTANT_MACROS
|
|
CPPDEFS += -DDESCRIPTION=$(DESCRIPTION)
|
|
CPPDEFS += -DVENDOR_ID=$(VENDOR_ID)
|
|
CPPDEFS += -DPRODUCT_ID=$(PRODUCT_ID)
|
|
CPPDEFS += -DMANUFACTURER=$(MANUFACTURER)
|
|
CPPDEFS += -DPRODUCT=$(PRODUCT)
|
|
ifdef MOUSE_DELAY_TIME
|
|
CPPDEFS += -DMOUSE_DELAY_TIME=$(MOUSE_DELAY_TIME)
|
|
endif
|
|
|
|
|
|
|
|
#---------------- Compiler Options C ----------------
|
|
# -g*: generate debugging information
|
|
# -O*: optimization level
|
|
# -f...: tuning, see GCC manual and avr-libc documentation
|
|
# -Wall...: warning level
|
|
# -Wa,...: tell GCC to pass this to the assembler.
|
|
# -adhlns...: create assembler listing
|
|
CFLAGS = -g$(DEBUG)
|
|
CFLAGS += $(CDEFS)
|
|
CFLAGS += -O$(OPT)
|
|
CFLAGS += -funsigned-char
|
|
CFLAGS += -funsigned-bitfields
|
|
CFLAGS += -ffunction-sections
|
|
CFLAGS += -fpack-struct
|
|
CFLAGS += -fshort-enums
|
|
CFLAGS += -Wall
|
|
CFLAGS += -Wstrict-prototypes
|
|
#CFLAGS += -mshort-calls
|
|
#CFLAGS += -fno-unit-at-a-time
|
|
#CFLAGS += -Wundef
|
|
#CFLAGS += -Wunreachable-code
|
|
#CFLAGS += -Wsign-compare
|
|
CFLAGS += -Wa,-adhlns=$(@:%.o=$(OBJDIR)/%.lst)
|
|
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
|
CFLAGS += $(CSTANDARD)
|
|
|
|
|
|
#---------------- Compiler Options C++ ----------------
|
|
# -g*: generate debugging information
|
|
# -O*: optimization level
|
|
# -f...: tuning, see GCC manual and avr-libc documentation
|
|
# -Wall...: warning level
|
|
# -Wa,...: tell GCC to pass this to the assembler.
|
|
# -adhlns...: create assembler listing
|
|
CPPFLAGS = -g$(DEBUG)
|
|
CPPFLAGS += $(CPPDEFS)
|
|
CPPFLAGS += -O$(OPT)
|
|
CPPFLAGS += -funsigned-char
|
|
CPPFLAGS += -funsigned-bitfields
|
|
CPPFLAGS += -fpack-struct
|
|
CPPFLAGS += -fshort-enums
|
|
CPPFLAGS += -fno-exceptions
|
|
CPPFLAGS += -Wall
|
|
CPPFLAGS += -Wundef
|
|
#CPPFLAGS += -mshort-calls
|
|
#CPPFLAGS += -fno-unit-at-a-time
|
|
#CPPFLAGS += -Wstrict-prototypes
|
|
#CPPFLAGS += -Wunreachable-code
|
|
#CPPFLAGS += -Wsign-compare
|
|
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
|
|
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
|
#CPPFLAGS += $(CSTANDARD)
|
|
|
|
|
|
#---------------- Assembler Options ----------------
|
|
# -Wa,...: tell GCC to pass this to the assembler.
|
|
# -adhlns: create listing
|
|
# -gstabs: have the assembler create line number information; note that
|
|
# for use in COFF files, additional information about filenames
|
|
# and function names needs to be present in the assembler source
|
|
# files -- see avr-libc docs [FIXME: not yet described there]
|
|
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
|
|
# dump that will be displayed for a given single line of source input.
|
|
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
|
|
|
|
|
|
#---------------- Library Options ----------------
|
|
# Minimalistic printf version
|
|
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
|
|
|
|
# Floating point printf version (requires MATH_LIB = -lm below)
|
|
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
|
|
|
|
# If this is left blank, then it will use the Standard printf version.
|
|
PRINTF_LIB =
|
|
#PRINTF_LIB = $(PRINTF_LIB_MIN)
|
|
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
|
|
|
|
|
|
# Minimalistic scanf version
|
|
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
|
|
|
|
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
|
|
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
|
|
|
|
# If this is left blank, then it will use the Standard scanf version.
|
|
SCANF_LIB =
|
|
#SCANF_LIB = $(SCANF_LIB_MIN)
|
|
#SCANF_LIB = $(SCANF_LIB_FLOAT)
|
|
|
|
|
|
MATH_LIB = -lm
|
|
|
|
|
|
# List any extra directories to look for libraries here.
|
|
# Each directory must be seperated by a space.
|
|
# Use forward slashes for directory separators.
|
|
# For a directory that has spaces, enclose it in quotes.
|
|
EXTRALIBDIRS =
|
|
|
|
|
|
|
|
#---------------- External Memory Options ----------------
|
|
|
|
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
|
# used for variables (.data/.bss) and heap (malloc()).
|
|
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
|
|
|
|
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
|
# only used for heap (malloc()).
|
|
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
|
|
|
|
EXTMEMOPTS =
|
|
|
|
|
|
|
|
#---------------- Linker Options ----------------
|
|
# -Wl,...: tell GCC to pass this to linker.
|
|
# -Map: create map file
|
|
# --cref: add cross reference to map file
|
|
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
|
|
LDFLAGS += -Wl,--relax
|
|
LDFLAGS += -Wl,--gc-sections
|
|
LDFLAGS += $(EXTMEMOPTS)
|
|
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
|
|
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
|
|
#LDFLAGS += -T linker_script.x
|
|
|
|
|
|
|
|
#---------------- Programming Options (avrdude) ----------------
|
|
|
|
# Programming hardware
|
|
# Type: avrdude -c ?
|
|
# to get a full listing.
|
|
#
|
|
AVRDUDE_PROGRAMMER = stk500v2
|
|
|
|
# com1 = serial port. Use lpt1 to connect to parallel port.
|
|
AVRDUDE_PORT = com1 # programmer connected to serial device
|
|
|
|
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
|
|
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
|
|
|
|
|
|
# Uncomment the following if you want avrdude's erase cycle counter.
|
|
# Note that this counter needs to be initialized first using -Yn,
|
|
# see avrdude manual.
|
|
#AVRDUDE_ERASE_COUNTER = -y
|
|
|
|
# Uncomment the following if you do /not/ wish a verification to be
|
|
# performed after programming the device.
|
|
#AVRDUDE_NO_VERIFY = -V
|
|
|
|
# Increase verbosity level. Please use this when submitting bug
|
|
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
|
|
# to submit bug reports.
|
|
#AVRDUDE_VERBOSE = -v -v
|
|
|
|
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
|
|
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
|
|
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
|
|
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
|
|
|
|
|
|
|
|
#---------------- Debugging Options ----------------
|
|
|
|
# For simulavr only - target MCU frequency.
|
|
DEBUG_MFREQ = $(F_CPU)
|
|
|
|
# Set the DEBUG_UI to either gdb or insight.
|
|
# DEBUG_UI = gdb
|
|
DEBUG_UI = insight
|
|
|
|
# Set the debugging back-end to either avarice, simulavr.
|
|
DEBUG_BACKEND = avarice
|
|
#DEBUG_BACKEND = simulavr
|
|
|
|
# GDB Init Filename.
|
|
GDBINIT_FILE = __avr_gdbinit
|
|
|
|
# When using avarice settings for the JTAG
|
|
JTAG_DEV = /dev/com1
|
|
|
|
# Debugging port used to communicate between GDB / avarice / simulavr.
|
|
DEBUG_PORT = 4242
|
|
|
|
# Debugging host used to communicate between GDB / avarice / simulavr, normally
|
|
# just set to localhost unless doing some sort of crazy debugging when
|
|
# avarice is running on a different computer.
|
|
DEBUG_HOST = localhost
|
|
|
|
|
|
|
|
#============================================================================
|
|
|
|
|
|
# Define programs and commands.
|
|
SHELL = sh
|
|
CC = avr-gcc
|
|
OBJCOPY = avr-objcopy
|
|
OBJDUMP = avr-objdump
|
|
SIZE = avr-size
|
|
AR = avr-ar rcs
|
|
NM = avr-nm
|
|
AVRDUDE = avrdude
|
|
REMOVE = rm -f
|
|
REMOVEDIR = rm -rf
|
|
COPY = cp
|
|
WINSHELL = cmd
|
|
|
|
|
|
# Define Messages
|
|
# English
|
|
MSG_ERRORS_NONE = Errors: none
|
|
MSG_BEGIN = -------- begin --------
|
|
MSG_END = -------- end --------
|
|
MSG_SIZE_BEFORE = Size before:
|
|
MSG_SIZE_AFTER = Size after:
|
|
MSG_COFF = Converting to AVR COFF:
|
|
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
|
|
MSG_FLASH = Creating load file for Flash:
|
|
MSG_EEPROM = Creating load file for EEPROM:
|
|
MSG_EXTENDED_LISTING = Creating Extended Listing:
|
|
MSG_SYMBOL_TABLE = Creating Symbol Table:
|
|
MSG_LINKING = Linking:
|
|
MSG_COMPILING = Compiling C:
|
|
MSG_COMPILING_CPP = Compiling C++:
|
|
MSG_ASSEMBLING = Assembling:
|
|
MSG_CLEANING = Cleaning project:
|
|
MSG_CREATING_LIBRARY = Creating library:
|
|
|
|
|
|
|
|
|
|
# Define all object files.
|
|
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
|
|
|
|
# Define all listing files.
|
|
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
|
|
|
|
|
|
# Compiler flags to generate dependency files.
|
|
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
|
|
|
|
|
|
# Combine all necessary flags and optional flags.
|
|
# Add target processor to flags.
|
|
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
|
|
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
|
|
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
|
|
|
|
|
|
|
|
|
|
|
|
# Default target.
|
|
all: begin gccversion sizebefore build sizeafter end
|
|
|
|
# Change the build target to build a HEX file or a library.
|
|
build: elf hex eep lss sym
|
|
#build: lib
|
|
|
|
|
|
elf: $(TARGET).elf
|
|
hex: $(TARGET).hex
|
|
eep: $(TARGET).eep
|
|
lss: $(TARGET).lss
|
|
sym: $(TARGET).sym
|
|
LIBNAME=lib$(TARGET).a
|
|
lib: $(LIBNAME)
|
|
|
|
|
|
|
|
# Eye candy.
|
|
# AVR Studio 3.x does not check make's exit code but relies on
|
|
# the following magic strings to be generated by the compile job.
|
|
begin:
|
|
@echo
|
|
@echo $(MSG_BEGIN)
|
|
|
|
end:
|
|
@echo $(MSG_END)
|
|
@echo
|
|
|
|
|
|
# Display size of file.
|
|
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
|
|
#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
|
|
ELFSIZE = $(SIZE) $(TARGET).elf
|
|
|
|
sizebefore:
|
|
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
|
|
2>/dev/null; echo; fi
|
|
|
|
sizeafter:
|
|
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
|
|
2>/dev/null; echo; fi
|
|
|
|
|
|
|
|
# Display compiler version information.
|
|
gccversion :
|
|
@$(CC) --version
|
|
|
|
|
|
|
|
# Program the device.
|
|
program: $(TARGET).hex $(TARGET).eep
|
|
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
|
|
|
|
|
|
# Generate avr-gdb config/init file which does the following:
|
|
# define the reset signal, load the target file, connect to target, and set
|
|
# a breakpoint at main().
|
|
gdb-config:
|
|
@$(REMOVE) $(GDBINIT_FILE)
|
|
@echo define reset >> $(GDBINIT_FILE)
|
|
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
|
|
@echo end >> $(GDBINIT_FILE)
|
|
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
|
|
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
|
|
ifeq ($(DEBUG_BACKEND),simulavr)
|
|
@echo load >> $(GDBINIT_FILE)
|
|
endif
|
|
@echo break main >> $(GDBINIT_FILE)
|
|
|
|
debug: gdb-config $(TARGET).elf
|
|
ifeq ($(DEBUG_BACKEND), avarice)
|
|
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
|
|
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
|
|
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
|
|
@$(WINSHELL) /c pause
|
|
|
|
else
|
|
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
|
|
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
|
|
endif
|
|
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
|
|
|
|
|
|
|
|
|
|
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
|
|
COFFCONVERT = $(OBJCOPY) --debugging
|
|
COFFCONVERT += --change-section-address .data-0x800000
|
|
COFFCONVERT += --change-section-address .bss-0x800000
|
|
COFFCONVERT += --change-section-address .noinit-0x800000
|
|
COFFCONVERT += --change-section-address .eeprom-0x810000
|
|
|
|
|
|
|
|
coff: $(TARGET).elf
|
|
@echo
|
|
@echo $(MSG_COFF) $(TARGET).cof
|
|
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
|
|
|
|
|
|
extcoff: $(TARGET).elf
|
|
@echo
|
|
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
|
|
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
|
|
|
|
|
|
|
|
# Create final output files (.hex, .eep) from ELF output file.
|
|
%.hex: %.elf
|
|
@echo
|
|
@echo $(MSG_FLASH) $@
|
|
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@
|
|
|
|
%.eep: %.elf
|
|
@echo
|
|
@echo $(MSG_EEPROM) $@
|
|
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
|
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
|
|
|
|
# Create extended listing file from ELF output file.
|
|
%.lss: %.elf
|
|
@echo
|
|
@echo $(MSG_EXTENDED_LISTING) $@
|
|
$(OBJDUMP) -h -S -z $< > $@
|
|
|
|
# Create a symbol table from ELF output file.
|
|
%.sym: %.elf
|
|
@echo
|
|
@echo $(MSG_SYMBOL_TABLE) $@
|
|
$(NM) -n $< > $@
|
|
|
|
|
|
|
|
# Create library from object files.
|
|
.SECONDARY : $(TARGET).a
|
|
.PRECIOUS : $(OBJ)
|
|
%.a: $(OBJ)
|
|
@echo
|
|
@echo $(MSG_CREATING_LIBRARY) $@
|
|
$(AR) $@ $(OBJ)
|
|
|
|
|
|
# Link: create ELF output file from object files.
|
|
.SECONDARY : $(TARGET).elf
|
|
.PRECIOUS : $(OBJ)
|
|
%.elf: $(OBJ)
|
|
@echo
|
|
@echo $(MSG_LINKING) $@
|
|
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
|
|
|
|
|
|
# Compile: create object files from C source files.
|
|
$(OBJDIR)/%.o : %.c
|
|
@echo
|
|
@echo $(MSG_COMPILING) $<
|
|
$(CC) -c $(ALL_CFLAGS) $< -o $@
|
|
|
|
|
|
# Compile: create object files from C++ source files.
|
|
$(OBJDIR)/%.o : %.cpp
|
|
@echo
|
|
@echo $(MSG_COMPILING_CPP) $<
|
|
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
|
|
|
|
|
|
# Compile: create assembler files from C source files.
|
|
%.s : %.c
|
|
$(CC) -S $(ALL_CFLAGS) $< -o $@
|
|
|
|
|
|
# Compile: create assembler files from C++ source files.
|
|
%.s : %.cpp
|
|
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
|
|
|
|
|
|
# Assemble: create object files from assembler source files.
|
|
$(OBJDIR)/%.o : %.S
|
|
@echo
|
|
@echo $(MSG_ASSEMBLING) $<
|
|
$(CC) -c $(ALL_ASFLAGS) $< -o $@
|
|
|
|
|
|
# Create preprocessed source for use in sending a bug report.
|
|
%.i : %.c
|
|
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
|
|
|
|
|
|
# Target: clean project.
|
|
clean: begin clean_list end
|
|
|
|
clean_list :
|
|
@echo
|
|
@echo $(MSG_CLEANING)
|
|
$(REMOVE) $(TARGET).hex
|
|
$(REMOVE) $(TARGET).eep
|
|
$(REMOVE) $(TARGET).cof
|
|
$(REMOVE) $(TARGET).elf
|
|
$(REMOVE) $(TARGET).map
|
|
$(REMOVE) $(TARGET).sym
|
|
$(REMOVE) $(TARGET).lss
|
|
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
|
|
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
|
|
$(REMOVE) $(SRC:.c=.s)
|
|
$(REMOVE) $(SRC:.c=.d)
|
|
$(REMOVE) $(SRC:.c=.i)
|
|
$(REMOVEDIR) .dep
|
|
|
|
|
|
# Create object files directory
|
|
$(shell mkdir $(OBJDIR) 2>/dev/null)
|
|
|
|
|
|
# Include the dependency files.
|
|
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
|
|
|
|
|
|
# Listing of phony targets.
|
|
.PHONY : all begin finish end sizebefore sizeafter gccversion \
|
|
build elf hex eep lss sym coff extcoff \
|
|
clean clean_list program debug gdb-config
|