mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-30 04:37:14 +06:00
4b453dca92
* remove keyboard-level instances of `MIDI_ENABLE = no`
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]*MIDI_ENABLE[ \t]*=[ \t]*no/d' {} +
```
Co-Authored-By: Nick Brassel <nick@tzarc.org>
* fix case-sensitivity issues on MIDI_ENABLE
Change instances of `MIDI_ENABLE = YES` to `MIDI_ENABLE = yes`.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE[ \t]*=[ \t]*[Yy][Ee][Ss];MIDI_ENABLE = yes;g' {} +
```
* replace `# MIDI controls` with `# MIDI support`
Replace `# MIDI controls` with `# MIDI support` in keyboard-level `rules.mk` files.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*MIDI[ \t]*\(controls\|support\).*;# MIDI support;g' {} +
```
* align inline comments
Aligns the inline comments to the length used by the QMK AVR rules.mk template.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE *= *yes.*;MIDI_ENABLE = yes # MIDI support;g' {} +
```
* remove commented instances of `MIDI_ENABLE` from keyboard `rules.mk` files
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#\([ \t]*MIDI_ENABLE\) = yes; \1 = no ;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;^\([ \t]*\)\(MIDI_ENABLE = no\);\2\1;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]\+MIDI_ENABLE *= *no/d' {} +
```
* remove MIDI configuration boilerplate from keyboard config.h files
Co-authored-by: Nick Brassel <nick@tzarc.org>
|
||
|---|---|---|
| .. | ||
| keymaps/default | ||
| config.h | ||
| fc200rt_qmk.c | ||
| fc200rt_qmk.h | ||
| info.json | ||
| readme.md | ||
| rules.mk | ||
fc200rt_qmk
A Leopold FC200RT rewired with Teensy 2.0
Uses original row and column matrix, so you can wire the teensy 2.0 to the corrosposnding column and row numbers and flash this firmware to the teensy.
Pinout of Leopold's matrix:
| c0 | c1 | c2 | c3 | c4 | c5 | c6 | c7 | c8 | c9 | c10 | c11 | c12 | c13 | c14 | c15 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| r0 | PAUS | Q | W | E | R | U | I | O | P | SLCK | ||||||
| r1 | LGUI | TAB | CAPS | F3 | T | Y | RBRC | F7 | LBRC | BSPC | LSFT | |||||
| r2 | A | D | F | J | K | L | SCLN | RGUI | BSLS | RSFT | ||||||
| r3 | ESC | X | F4 | G | H | F6 | QUOT | LALT | F11 | SPC | UP | |||||
| r4 | Z | C | V | M | COMM | DOT | ENT | |||||||||
| r5 | B | N | APP | SLSH | RALT | F12 | DOWN | RGHT | LEFT | |||||||
| r6 | LCTL | GRV | F1 | F2 | 5 | 6 | EQL | F8 | MINS | F9 | DEL | INS | PGUP | HOME | ||
| r7 | F5 | 1 | 2 | 3 | 4 | 7 | 8 | 9 | 0 | PSCR | F10 | PGDN | END | |||
Choose any key from the corrosponding row and column and solder it to the pin on the Teensy listed in the firmware config.h
NOTE: Some of the keys had mislabled columns and rows, so make sure the columns are all connected without diodes to one another, and that the rows are soldered after the diode
- Keyboard Maintainer: NaCly
- Hardware Supported: The PCBs, controllers supported
- Hardware Availability: Leopold FC200RT + Teensy 2.0
Make example for this keyboard (after setting up your build environment):
make handwired/fc200rt_qmk:default
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.