mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-01 05:07:26 +06:00
72 lines
1.8 KiB
C
72 lines
1.8 KiB
C
#include "ergotaco.h"
|
|
|
|
bool i2c_initialized = 0;
|
|
i2c_status_t mcp23018_status = 0x20;
|
|
|
|
void matrix_init_kb(void) {
|
|
// (tied to Vcc for hardware convenience)
|
|
//gpio_set_pin_input(B4); // set B(4) as input, internal pull-up disabled
|
|
|
|
// unused pins
|
|
// set as input with internal pull-up enabled
|
|
gpio_set_pin_input_high(B4);
|
|
gpio_set_pin_input_high(B5);
|
|
gpio_set_pin_input_high(B6);
|
|
gpio_set_pin_input_high(B7);
|
|
|
|
gpio_set_pin_input_high(C6);
|
|
gpio_set_pin_input_high(C7);
|
|
|
|
gpio_set_pin_input_high(D4);
|
|
gpio_set_pin_input_high(D5);
|
|
gpio_set_pin_input_high(D6);
|
|
gpio_set_pin_input_high(D7);
|
|
|
|
gpio_set_pin_input_high(E6);
|
|
|
|
gpio_set_pin_input_high(D0);
|
|
gpio_set_pin_input_high(D1);
|
|
gpio_set_pin_input_high(D4);
|
|
gpio_set_pin_input_high(D6);
|
|
gpio_set_pin_input_high(D7);
|
|
|
|
matrix_init_user();
|
|
}
|
|
|
|
|
|
uint8_t init_mcp23018(void) {
|
|
print("starting init");
|
|
mcp23018_status = 0x20;
|
|
|
|
// I2C subsystem
|
|
|
|
// uint8_t sreg_prev;
|
|
// sreg_prev=SREG;
|
|
// cli();
|
|
|
|
if (i2c_initialized == 0) {
|
|
i2c_init(); // on pins D(1,0)
|
|
i2c_initialized = true;
|
|
_delay_ms(1000);
|
|
}
|
|
|
|
// set pin direction
|
|
// - unused : input : 1
|
|
// - input : input : 1
|
|
// - driving : output : 0
|
|
uint8_t data[] = {0b00000000, 0b00111111};
|
|
mcp23018_status = i2c_write_register(I2C_ADDR, IODIRA, data, sizeof(data), ERGODOX_EZ_I2C_TIMEOUT);
|
|
|
|
if (!mcp23018_status) {
|
|
// set pull-up
|
|
// - unused : on : 1
|
|
// - input : on : 1
|
|
// - driving : off : 0
|
|
mcp23018_status = i2c_write_register(I2C_ADDR, GPPUA, data, sizeof(data), ERGODOX_EZ_I2C_TIMEOUT);
|
|
}
|
|
|
|
// SREG=sreg_prev;
|
|
//uprintf("Init %x\n", mcp23018_status);
|
|
return mcp23018_status;
|
|
}
|