mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-27 19:16:40 +06:00

History

Ryan a8d440e4e0 Tidy up NKRO_ENABLE rules (#15382 )		2021-12-09 16:05:44 +11:00
..
keymaps
config.h
info.json	Remove width, height and key_count from info.json (#14274 )	2021-09-12 14:04:56 +10:00
merro60.c
merro60.h
readme.md
rules.mk	Tidy up NKRO_ENABLE rules (#15382 )	2021-12-09 16:05:44 +11:00

readme.md

merro60

merro60 PCB

A standard 60% format keyboard pcb with USB-C and unified daughterboard compatibility. Has modified cutouts to allow usage of certain tray mount cases into gummy gasket o-ring mount.

Keyboard Maintainer: Alexander Lee Hardware Supported: chlx PCB merro60.1, merro60.1.1, merro60.1.2

Enter bootloader mode by any of the following options -

When unplugged, holding the top-left key (typically ESC) while plugging in the keyboard
When plugged in, pressing and releasing the reset button on the pcb bottom behind the CAPSLOCK / A-key region
When plugged in, shorting out the two reset metal contacts near the spacebar switch location (NOT the spacebar switch pin holes)

Make example for this keyboard (after setting up your build environment):

make chlx/merro60:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.