mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-22 00:16:41 +06:00
|
…
|
||
|---|---|---|
| .. | ||
| keymaps/default | ||
| config.h | ||
| keyboard.json | ||
| orthograph.c | ||
| readme.md | ||
Orthograph
Split ortho keyboard with RGB backlighting
- Keyboard Maintainer: vladkvit
- Hardware Supported: Two PCBs + thin Pro Micro compatible boards (Elite C has been extensively tested). Boards with castellated holes (Elite C style) are much easier to install. Maximum thickness is around 3-3.5mm, so a stock Pro Micro (4mm) will not work.
- Hardware Availability: https://github.com/vladkvit/orthograph_keyboard for PCB, https://cad.onshape.com/documents/4f736d64448134c948af475a/w/ccab05fd44a7db98ce27216a/e/49ebfb6b27080b9b45bea74a?renderMode=0&uiState=64dd45dbc62cae486db10048 and https://cad.onshape.com/documents/5ff52821d2cb196f3db3d1e8/w/04b7cb21b748da89c8df31e6/e/486b72e32db97b2dfdf00af8 for the hardware
Make example for this keyboard (after setting up your build environment):
qmk compile -kb orthograph -km default
Flashing example for this keyboard: qmk flash -kb orthograph -km default Then, flash EEPROM with handedness (left / right) on both sides.
The reset button is on the underside of each half of the keyboard.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB
- Keycode in layout: Press the key mapped to
QK_BOOTif it is available