mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-27 11:38:58 +06:00
Code Issues Packages Projects Releases Wiki Activity
2acb426b8e
keychron_qmk_firmware/keyboards/converter/xmk
History
Ryan ef6a712899
Even more info.json whitespace cleanups (#20703)
2023-05-04 19:09:59 +10:00
..
keymaps/default
config.h
info.json Even more info.json whitespace cleanups (#20703) 2023-05-04 19:09:59 +10:00
post_rules.mk
readme.md
rules.mk
xmk_matrix.c
xmk_matrix.h
xmk_shell.c
xmk.c

readme.md

converter/xmk

converter/xmk is the QMK keyboard definition for 𝑥MK.

  • Keyboard Maintainer: Manna Harbour
  • Hardware Supported: Any QMK-compatible MCU board
  • Hardware Availability: No additional hardware required

Make example for this keyboard (after setting up your build environment):

make converter/xmk:default

Flashing example for this keyboard:

make converter/xmk:default:flash

To flash pre-compiled firmware to a pro-micro on Linux without using the qmk CLI:

avrdude -p atmega32u4 -c avr109 -U flash:w:converter_xmk_default.hex:i -P /dev/ttyACM0

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 4 ways:

  • Boot shell command: Give the boot command to the converter/xmk shell, e.g. echo "boot" > /dev/ttyACM0
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard