keychron_qmk_firmware/keyboards/handwired/3dp660_oled

handwired/3dp660_oled

A handwired FC660 layout with OLED display support.

• Keyboard Maintainer: xia0
• Hardware Supported: ATmega32U4 e.g. Arduino Pro Micro or Teensy 2.0
  • Note: If using a Pro Micro, pins B0 and D5 are required. Click for details.
• Hardware Availability: Printables

Make example for this keyboard (after setting up your build environment):

make handwired/3dp660_oled:default

Flashing example for this keyboard:

make handwired/3dp660_oled:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

• Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
• Physical reset button: Briefly press the button on the MCU or short RST to GND.
• Keycode in layout: Press the key mapped to QK_BOOT if it is available