mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-22 16:37:58 +06:00
Code Issues Packages Projects Releases Wiki Activity
1b3f7fcf7d
keychron_qmk_firmware/keyboards/yandrstudio/nz67v2
History
Ryan 7e0299117b
Move encoder config to data driven (#19923) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-02-26 09:45:12 +11:00
..
keymaps Open Use standard magic keycodes in yandrstudio keymaps (#19919) 2023-02-23 14:46:15 +00:00
board.h
config.h Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
halconf.h
info.json Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
mcuconf.h
nz67v2.c Remove magic bodges from via keymaps (#19890) 2023-02-22 01:15:18 +00:00
nz67v2.h Remove magic bodges from via keymaps (#19890) 2023-02-22 01:15:18 +00:00
readme.md
rules.mk

readme.md

nz67v2

nz67v2

A 67 keys keyboard with rgb (key and underground). This keyboard use 16mhz HSE and APM32F103 as MCU.

Make example for this keyboard (after setting up your build environment):

make yandrstudio/nz67v2:default

See build environment setup then the make instructions for more information.

Bootloader

Enter the bootloader in 2 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key which is Escape in this keyboard) and plug in the keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available.