mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-03 22:36:52 +06:00

History

Stefan Kerkmann c1297ceb97 [Core] Remove matrix_is_modified() and debounce_is_active() (#15349 )		2021-11-29 08:22:10 -08:00
..
keymaps
.noci
config.h
info.json
matrix.c	[Core] Remove matrix_is_modified() and debounce_is_active() (#15349 )	2021-11-29 08:22:10 -08:00
readme.md
rules.mk	Remove redundant `UNICODE_ENABLE = no` in keyboard-level rules.mk (#14633 )	2021-09-30 08:14:21 +10:00
sixkeyboard.c
sixkeyboard.h

readme.md

Techkeys SixKeyBoard

Keyboard Maintainer: QMK Community
Hardware Supported: Techkeys SixKeyBoard PCB
Hardware Availability: Techkeys

Make example for this keyboard (after setting up your build environment):

make sixkeyboard:default

See build environment setup then the make instructions for more information.

Hardware Info

The schematic is like this:

 switches       leds
,--+--+--.   ,--+--+--.
|C7|B7|B5|   |C6|B6|B4|
+--+--+--+   +--+--+--+
|D6|D1|D4|   |D5|D2|D3|
`--+--+--'   `--+--+--'

The LED on the bottom is C4. All 7 of the leds are turned on when the keyboard boots-up in the sixkeyboard.c file - backlight_enable is not required. The MCU is an Atmega16u2, so the flash memory is limited to 0x3000 bytes - the current setup uses just about all of that! I'm sure things can be opitimised a bit.

There is a jumper on the bottom of the board (next to the USB port) that serves as a reset button - I drilled a hole in my case to allow for quick access via a screwdriver/metal object.