mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-22 08:27:56 +06:00
Code Issues Packages Projects Releases Wiki Activity
11d49d00e7
keychron_qmk_firmware/keyboards/skeletonkbd/skeletonnumpad
History
Ryan ccb6c908dd
Remove SOFT_SERIAL_PIN for non-split boards (#19774) 
* Remove `SOFT_SERIAL_PIN` for non-split boards

* Delete more empty config.h
2023-02-08 23:57:42 +00:00
..
keymaps Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
config.h Remove SOFT_SERIAL_PIN for non-split boards (#19774) 2023-02-08 23:57:42 +00:00
info.json Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
readme.md
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
skeletonnumpad.c
skeletonnumpad.h

readme.md

SkeletonNumPad

skeletonnumpad

Simple NumPad with acrylic case.

Make example for this keyboard (after setting up your build environment):

make skeletonkbd/skeletonnumpad:default

Flashing example for this keyboard:

make skeletonkbd/skeletonnumpad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available