cbabc8dbe6
* Replace Tapping Force Hold feature with Quick Tap Term * Replace keyboard level TAPPING_FORCE_HOLD with QUICK_TAP_TERM 0 * Deprecate force hold in info_config.json * Before and after quick tap term unit tests * Quick tap unit tests iteration * Keymap config.h correction * Remove TAPPING_FORCE_HOLD_PER_KEY macros that were missed * Add two more test cases for quick tap * Replace TAPPING_FORCE_HOLD with QUICK_TAP_TERM in configs #2 * Replace TAPPING_FORCE_HOLD_PER_KEY with QUICK_TAP_TERM_PER_KEY in configs #2 * Add function declaration for get_quick_tap_term Co-authored-by: Stefan Kerkmann <karlk90@pm.me> |
||
|---|---|---|
| .. | ||
| astar | ||
| astar_mirrored | ||
| f103 | ||
| feather | ||
| keymaps | ||
| promicro | ||
| teensy2 | ||
| atreus.c | ||
| atreus.h | ||
| config.h | ||
| info.json | ||
| readme.md | ||
| rules.mk | ||
Atreus
A small mechanical keyboard that is based around the shape of the human hand.
Keyboard Maintainer: Phil Hagelberg
Hardware Supported: Atreus, PCB-based or hand-wired
Hardware Availability: https://atreus.technomancy.us
These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in several variants: powered by a Teensy 2 or STM32F103C8T6 based MCU board (usually hand-wired), powered by an A-Star or ProMicro (usually using a PCB). You will need to use different make commands depending on the variant you have; see examples below.
Make example for this keyboard (after setting up your build environment):
make atreus:default:avrdude
If you would like to use one of the alternative controllers:
make atreus/astar:default:flash
make atreus/teensy2:default:flash
make atreus/promicro:default:flash
make atreus/f103:default:flash
If your keyboard layout is a mirror image of what you expected (i.e. you do not get QWERTY on the left but YTREWQ on the right), then you have an A-Star powered Atreus (older than March 2016) with PCB labels facing down instead of up. Specify that by adding PCBDOWN=yes to your make commands, e.g.
make PCBDOWN=yes atreus:default:avrdude
Unlike the TMK firmware, these commands should be run from the root of the repository, not the directory containing this readme.
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.