mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-25 10:44:59 +06:00
Code Issues Packages Projects Releases Wiki Activity
0e7acb777a
keychron_qmk_firmware/keyboards/melgeek/mach80
History
Ryan d8aec71e48
Remove trailing zeroes in info.json layouts (#20156)
2023-03-17 14:21:53 +00:00
..
keymaps Remove legacy Grave Escape keycodes (#18787) 2022-10-20 18:04:11 -07:00
rev1 Move matrix config to info.json, part 7 (#20020) 2023-03-11 00:39:56 +11:00
rev2 Move matrix config to info.json, part 7 (#20020) 2023-03-11 00:39:56 +11:00
config.h Remove matrix size defines (#19581) 2023-02-17 16:08:25 +11:00
info.json Remove trailing zeroes in info.json layouts (#20156) 2023-03-17 14:21:53 +00:00
mach80.h
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00

readme.md

MelGeek Mach80

Mach80

A hotswap 80% RGB Custom Mechanical keyboard.

  • Keyboard Maintainer: melgeek001365
  • Hardware Supported: Mach80 rev1 20210819
  • Hardware Availability: MelGeek

Make example for this keyboard (after setting up your build environment):

make melgeek/mach80/rev1:default

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead * Keycode in layout: Press the key mapped to QK_BOOT if it is available *

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.