keychron_qmk_firmware/keyboards/chord/zero

CHORD ZERO Stenographic Keyboard

CHORD ZERO is a stenographic keyboard that can be used with Plover or any other application that supports the TX Bolt or GeminiPR protocol.

• Keyboard Maintainer: Simon Hengel
• Hardware Supported: REV 0, REV 1
• Hardware Availability: https://github.com/sol/chord-zero#readme

Make example for this keyboard (after setting up your build environment):

make chord/zero:default

or

qmk compile -kb chord/zero -km default

This will generate chord_zero_default.uf2.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

• Reset key combo: Press the six keys at the outer columns on each side of the keyboard simultaneously while it is plugged in
• Bootmagic reset: Hold down the top left key and plug in the keyboard
• Physical reset button: Press the button on the back of the PCB and plug in the keyboard

Once the keyboard is in bootloader mode you can mount it as a USB mass storage device and copy the firmware (the file chord_zero_default.uf2) onto it. Once copying is completed the keyboard will reboot automatically.