mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-24 17:37:40 +06:00
9dbc0473ef
* Start of dz65v2 map for sbennett13 * No wpm, disable some rgb, ~copyright~ * No more raindrops * Remove more rgb modes and set default * Almost orgot this crappy thing * cannot define startup :( * Layered esc is kc_grv * Start of dz65v2 map for sbennett13 * No wpm, disable some rgb, ~copyright~ * No more raindrops * Remove more rgb modes and set default * Almost orgot this crappy thing * cannot define startup :( * Layered esc is kc_grv * Add license to config and keymap |
||
|---|---|---|
| .. | ||
| keymaps | ||
| v1 | ||
| v2 | ||
| v3 | ||
| config.h | ||
| dz65rgb.c | ||
| dz65rgb.h | ||
| info.json | ||
| readme.md | ||
DZ65RGB
A customizable 65% RGB keyboard.
- Keyboard Maintainer: moyi4681
- Hardware Supported: DZ65RGB V1,V2 and V3
- Hardware Availability: KBDfans
There are three versions of the DZ65RGB. Please use the appropriate firmware for your board.
- V1: STM32F303 (Arm), takes .bin files
- V2: ATmega32U4 (AVR), takes .hex files, is31fl3731 rgbmatrix driver
- V3: ATmega32U4 (AVR), takes .bin files, is31fl3741 rgbmatrix driver
Bootloader mode
To put in bootloader mode, hold the Esc key while plugging in the USB cable. or use reset key behind the pcb.
Making firmware
Make example for this keyboard (after setting up your build environment):
make dztech/dz65rgb/v1:default # Arm (STM32F303)
make dztech/dz65rgb/v2:default # AVR (ATmega32U4)
make dztech/dz65rgb/v3:default # AVR (ATmega32U4)
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.