mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-25 09:56:54 +06:00
Code Issues Packages Projects Releases Wiki Activity
0966901f95
keychron_qmk_firmware/keyboards/enviousdesign/mcro
History
Joel Challis 831deac212
Migrate build target markers to keyboard.json (#23293)
2024-03-30 11:31:50 +00:00
..
rev1 Migrate build target markers to keyboard.json (#23293) 2024-03-30 11:31:50 +00:00
readme.md

readme.md

EnvKB MCRO

Image of EnvKB MCRO PCB

A small 12 Key macro pad for various uses

  • Keyboard Maintainer: Envious-Data
  • Hardware Supported: EnvKB MCRO (Pi Pico)
  • Hardware Availability: GitHub

Make example for this keyboard (after setting up your build environment):

make enviousdesign/mcro:default

Flashing example for this keyboard:

make enviousdesign/mcro:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
  • Physical reset: Hold down the BOOTSEL button on the Pi Pico, then either plug the board in or press the RESET button.
  • Keycode in layout: There is no key mapped to QK_BOOT in the pre-created keymaps, but you may assign this key in any keymaps you create.

After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named RPI-RP2. If the CLI is unable to find this device, the compiled .uf2 file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.