keychron_qmk_firmware/keyboards/jj40/keymaps/waples

Waples jj40 keymap

based heavily on my lets split Waples

Layers

I currently have the following layers in my keymap:

• Qwerty (as default)
• Dvorak (still learning this type of layout, so not really used much)
• Lefty (lower)
• Righty (raise)
• Dual (adjust)

Note to self:

YOU NEED TO USE bootloadHID -r jj40_waples.hex

the stuff below is out of date and I think about removing them from this readme

QWERTY

| Tab |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  | Bsp |
|C_Esc|  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |S_Ent|
| Sft |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  |  "  |
|P_SCR| GUI | Alt | Cps | ^L^ | Bsp | Spc | ^R^ | Lft | Dwn | Up! | Rgt |

DVORAK

| Tab |  "  |  ,  |  .  |  P  |  Y  |  F  |  G  |  C  |  R  |  L  | Bsp |
|C_Esc|  A  |  O  |  E  |  U  |  I  |  D  |  H  |  T  |  N  |  S  |S_Ent|
| Sft |  ;  |  Q  |  J  |  K  |  X  |  B  |  M  |  W  |  V  |  Z  |  /  |
|P_SCR| GUI | Alt | Cps | ^L^ | Bsp | Spc | ^R^ | Lft | Dwn | Up! | Rgt |

LEFTY (lower)

|  ~  |  !  |  @  |  #  |  $  |  %  |  ^  |  &  |  *  |  (  |  )  | Bsp |
| Del |     |     |     |     |     |     |  (  |  )  |  [  |  ]  |     |
|     |     |     |     |     |     |     |     |     |     |     |     |
|     |     |     |     |     |     | Ins |     | Hme | PgD | PgU | End |

RIGHTY (raise)

|  `  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  | Bsp |
| Del | F1  | F2  | F3  | F4  |     |  =  |  -  |  \  |  /  |     |     |
|     | F5  | F6  | F7  | F8  |     |     |     |     |     |     |     |
|     | F9  | F10 | F11 |     |     |     |     |     |     |     |     |

DUAL

|Reset|     |     |     |     |QWERT| GAME|     |     |     |     |Reset|
|     | Prv | Stp | Tog | Nxt | Nrm | Swp |     |     |     |     |     |
|     |     | Mte | Vol-| Vol+|     | NKRO|     |     |     |     |     |
|     |     |     |     |     |     |DVORK|     |     |     |     |     |