mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-22 00:16:41 +06:00
Code Issues Packages Projects Releases Wiki Activity
old_playground
keychron_qmk_firmware/keyboards/psuieee/pluto12
History
Ryan 7e0299117b
Move encoder config to data driven (#19923) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-02-26 09:45:12 +11:00
..
keymaps
config.h Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
info.json Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
pluto12.c
pluto12.h
readme.md
rules.mk

readme.md

pluto12

pluto12

The pluto12 is a 4x3 macropad designed for use in the Penn State IEEE Student Chapter's 2021-22 workshop series. Designed by the 2021-22 Penn State IEEE Projects Committee.

Make example for this keyboard (after setting up your build environment):

make psuieee/pluto12:default

Flashing example for this keyboard:

make psuieee/pluto12:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available