keychron_qmk_firmware/keyboards/kapl/rev1/config.h

77 lines
2.4 KiB
C

// Copyright 2022 Alexander Lozyuk (@keyzog)
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
// wiring of each half
#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
/* Select hand configuration */
#define MASTER_LEFT
#define RGB_DI_PIN D4
#define RGBLED_NUM 88
#define RGBLED_SPLIT { 44, 44 }
#define RGBLIGHT_SPLIT
#define RGBLIGHT_LIMIT_VAL 120 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
#define RGB_MATRIX_LED_COUNT 88
#define RGB_MATRIX_SPLIT { 44, 44 }
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
#define SPLIT_TRANSPORT_MIRROR
#ifdef RGBLIGHT_ENABLE
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 16
#define RGBLIGHT_VAL_STEP 16
#define RGBLIGHT_EFFECT_BREATHING
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
#define RGBLIGHT_EFFECT_CHRISTMAS
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
#define RGBLIGHT_EFFECT_TWINKLE
#endif
#ifdef RGB_MATRIX_ENABLE
#define RGB_MATRIX_HUE_STEP 8
#define RGB_MATRIX_SAT_STEP 16
#define RGB_MATRIX_VAL_STEP 16
#define RGB_MATRIX_SPD_STEP 10
// EFFECTS
#define ENABLE_RGB_MATRIX_ALPHAS_MODS
#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
#define ENABLE_RGB_MATRIX_BREATHING
#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
#define ENABLE_RGB_MATRIX_CYCLE_ALL
#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
#define ENABLE_RGB_MATRIX_HUE_BREATHING
#define ENABLE_RGB_MATRIX_HUE_WAVE
// KEYPRESSES EFFECTS
#define RGB_MATRIX_KEYPRESSES
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
#define ENABLE_RGB_MATRIX_MULTISPLASH
#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
#define SPLIT_LAYER_STATE_ENABLE
#define SPLIT_LED_STATE_ENABLE