mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-25 01:47:10 +06:00
Code Issues Packages Projects Releases Wiki Activity
old_playground
keychron_qmk_firmware/keyboards/1upkeyboards/super16v2
History
Ryan 7e0299117b
Move encoder config to data driven (#19923) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-02-26 09:45:12 +11:00
..
keymaps
config.h Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
info.json Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
readme.md
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
super16v2.c
super16v2.h

readme.md

Super 16 V2

A 4x4 macropad with RGB inswitch lighting and underglow.

  • Keyboard Maintainer: MechMerlin
  • Hardware Supported: 1upkeyboards Super 16 V2
  • Hardware Availability: 1upkeyboards

Make example for this keyboard (after setting up your build environment):

make 1upkeyboards/super16v2:default

Flashing example for this keyboard:

make 1upkeyboards/super16v2:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available