mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-21 16:06:35 +06:00
Code Issues Packages Projects Releases Wiki Activity
master
keychron_qmk_firmware/keyboards/tzarc/djinn
History
Nick Brassel 45dc2499dc
Remove all via-enabled keymaps, including via. (#24322)
2024-08-26 07:51:22 +10:00
..
graphics
keymaps/default Remove all via-enabled keymaps, including via. (#24322) 2024-08-26 07:51:22 +10:00
rev1 Migrate split.soft_serial_pin to split.serial.pin O-Z (#24146) 2024-07-23 12:12:52 +01:00
rev2 Migrate SPLIT_HAND_PIN to json (#23924) 2024-07-13 13:29:16 +01:00
config.h
djinn_portscan_matrix.c
djinn_split_sync.c
djinn_usbpd.c
djinn.c
djinn.h
halconf.h
info.json Migrate SERIAL_DRIVER to json (#23925) 2024-07-13 13:12:35 +01:00
mcuconf.h
readme.md
rules.mk Migrate SERIAL_DRIVER to json (#23925) 2024-07-13 13:12:35 +01:00

readme.md

Djinn

Djinn

The Djinn is a 64-key split keyboard -- dual 4x7 with a 4-key thumb cluster and encoders. It also has a 5-way tactile switch under the thumb. Oh, and two displays.

Keyboard Maintainer: tzarc
Hardware Supported: Djinn: rev1, rev2
Hardware Availability: Open-source

Make example for this keyboard (after setting up your build environment):

make tzarc/djinn/rev2:default

Flashing example for this keyboard:

make tzarc/djinn/rev2:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top-left key and plug in the keyboard.
  • Physical reset button: Briefly press the button on the back of the PCB.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available.