keychron_qmk_firmware/keyboards/sofle/keyhive

Keyhive Sofle Keyboard

Sofle is 6×4+5 keys column-staggered split keyboard. Based on Lily58, Corne and Helix keyboards.

For details about the keyboard design, refer to Josef's blog: Sofle Keyboard - a split keyboard based on Lily58 and Crkbd

Build guide: Keyhive Sofle RGB build guide

• Keyboard Maintainer: Winder
• Hardware Supported: Keyhive Sofle RGB, ProMicro / Elite-C
• Hardware Availability: Keyhive

Acknowledgements

• Solartempest - the image on this page and most of the code is either copied directly or inspired by their fork. Solartempest's fork..
• Keyhive fork defined all of the board settings.

Supported Keymaps

The keyhive schematic has been slightly modified compared to the open source sofle and not all keymaps are compatible.

• default: Basic functionality, no rgb, no VIA.
• keyhive_via - Includes rgblighting and special support for remapping encoders with VIA.
• Other: may work but backwards compatibility is not guaranteed or tested.

VIA Support

As of 1.3.1, the VIA tool does not support Keyhive/Sofle V2 out of the box. See keyhive_via for details about configuring and using VIA.

Compiling

Make example for this keyboard (after setting up your build environment):

make sofle/keyhive:default

Flashing

Flash using the correct command below (or use QMK Toolbox). These commands can be mixed if, for example, you have an Elite C on the left and a pro micro on the right.

Press reset button on the keyboard when asked.

Disconnect the first half, connect the second one and repeat the process.

# for Pro Micro-based builds
make sofle/keyhive:default:avrdude-split-left
make sofle/keyhive:default:avrdude-split-right

# for Elite C or DFU bootloader builds
make sofle/keyhive:default:dfu-split-left
make sofle/keyhive:default:dfu-split-right

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.