mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-22 00:16:41 +06:00
Code Issues Packages Projects Releases Wiki Activity
master
keychron_qmk_firmware/keyboards/sawnsprojects/plaque80
History
Nick Brassel 45dc2499dc
Remove all via-enabled keymaps, including via. (#24322)
2024-08-26 07:51:22 +10:00
..
keymaps/default
keyboard.json
readme.md

readme.md

Plaque80

Plaque80

A TKL keyboard sold in ParamountKeeb. Atmega32u4 soldered PCB. Sold under the name "Plaque80" with Plaque80 keyboard case. This PCB can compatible with Plaque80 keyboard case and several TKL boards like Geonworks Frog/F1-8x; KFE-CE; TGR Jane; Cloudline; Singa Jaguar; Amber80, among others.

Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other. Please use the .hex or .bin appropriate for your board.

Make examples for this keyboard (after setting up your build environment):

make sawnsprojects/plaque80:default

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.