mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-22 00:16:41 +06:00
Code Issues Packages Projects Releases Wiki Activity
master
keychron_qmk_firmware/keyboards/keychron/q11
History
Nick Brassel 45dc2499dc
Remove all via-enabled keymaps, including via. (#24322)
2024-08-26 07:51:22 +10:00
..
ansi_encoder Remove all via-enabled keymaps, including via. (#24322) 2024-08-26 07:51:22 +10:00
iso_encoder Remove all via-enabled keymaps, including via. (#24322) 2024-08-26 07:51:22 +10:00
config.h Migrate half-duplex SERIAL_USART_TX_PIN to DD (#24143) 2024-07-18 22:21:26 +01:00
halconf.h
info.json Migrate half-duplex SERIAL_USART_TX_PIN to DD (#24143) 2024-07-18 22:21:26 +01:00
mcuconf.h
q11.c Update GPIO API usage in keyboard code (#23361) 2024-05-03 15:21:29 +10:00
readme.md

readme.md

Keychron Q11

Keychron Q11

A customizable 75% split keyboard.

Make example for this keyboard (after setting up your build environment):

make keychron/q11/ansi_encoder:default
make keychron/q11/iso_encoder:default

Flashing example for this keyboard:

make keychron/q11/ansi_encoder:default:flash
make keychron/q11/iso_encoder:default:flash

Reset Key: The master and slave side should be flashed individually, to enter flashing mode, hold down the key located at K01, which programmed as Esc while plugging in the keyboard for the master side and hold down the key located at K67, which programmed as Del while plugging in the keyboard for the slave side.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.